Effect of Impact Load on SIFCON

Authors

  • Nadia Moneem Al -Abdalay

  • Husein Ali Zeini

  • Huda Zuhair Kubba

Keywords:

sifcon, micro steel fiber, fly ash, silica fume, impact resistance

Abstract

In present paper, some mechanical properties of SIFCON specimens are studied and they are compared with conventional mortar. The cement based slurry used in this work is a composition of cement, fly ash, silica fume. From the results achieved it was found that SIFCON specimens are much better than conventional mortar. The compressive, splitting, flexural strength and impact resistance for conventional mortar and SIFCON specimens were investigated and also plotted.

Downloads

How to Cite

Nadia Moneem Al -Abdalay, Husein Ali Zeini, & Huda Zuhair Kubba. (2019). Effect of Impact Load on SIFCON. Global Journals of Research in Engineering, 19(E2), 17–27. Retrieved from https://engineeringresearch.org/index.php/GJRE/article/view/1925

 
Effect of Impact Load on SIFCON

Published

2019-05-15

Issue

Vol. 19 No. E2 (2019): GJRE-E Civil and Structural: Volume 19 Issue E2

Section

Articles

License

Copyright (c) 2019 Authors and Global Journals Private Limited

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.