Calculation of Time-Varying Mesh Stiffness of Internal Gears based on Precise Tooth Profile and Dynamic Analysis of Planetary Systems with Root Cracks
DOI:
https://doi.org/10.34257/GJREAVOL24IS1PG29Keywords:
precise tooth profile, potential energy method, internal meshing gear stiffness, planetary gear dynamics, Zoom FFT analysis
Abstract
The internal meshing spur gear pair is the research object and the potential energy method is applied to calculate the time-varying meshing stiffness of the internal gear The internal gear tooth profile is divided into two parts involute and transition curves and the gear tooth stiffness is calculated by numerical integration based on accurate tooth profile which improves the calculation accuracy Analyzed the influence of different crack size parameters on the stiffness of internal meshing gears A coupled dynamic model of a planetary system with internal gear crack faults was established and the influence of cracks on the dynamic response of the planetary system was studied using Zoom-FFT spectrum and cepstrum analysis methods The simulation results show that as the crack parameter size increases the mesh stiffness of the internal gear pair gradually weakens and the periodic vibration impact of the planetary-internal gear pair is also more severe Cepstrum analysis can easily capture weak fault characteristic frequency information in the system and discover their variation patterns The research results can provide a theoretical basis for the state monitoring and fault diagnosis of gear systems with crack defects
Downloads
How to Cite
Published
2024-03-27
Issue
Section
License
Copyright (c) 2024 Authors and Global Journals Private Limited
This work is licensed under a Creative Commons Attribution 4.0 International License.