FPGA Physical Layer Implementation of Fixed WIMAX for Data Transmission
Keywords:
Abstract
The telecommunication area in last decade has witnessed the interest towards the providing the quality of service to the users but achieving this QoS with increasing users as the most significant issue As a result various technologies have come into existence The broadband wireless access is one of the ways to reach the high business demand for increasing the internet connection The wireless solution has been found to remove the limitations in capacity in comparison to wired technologies The significant technique called OFDM Orthogonal Frequency Division Multiplexing provides the better QoS but leads to high Cyclic Prefix CP The implementation of WiMAX standards on FPGA is a big challenge as this wireless standard is a complicated standard The hardware modeling made here to simulate the physical layer of WiMAX on FPGA evaluates the system performance This paper introduces a design of WiMAX physical layer implemented over FPGA and analyzes the performance of the implemented system The methodology here is first to design the hardware architecture of the system being implemented on the FPGA and then to transfer the design on the FPGA board The system performance is evaluated by generating a random digital data and transferring the data from the transmitter on the implemented communication system The received data is then compared with the transmitted data to evaluate the Bit Errorrate of the implemented system
Downloads
How to Cite
Published
2023-06-21
Issue
Section
License
Copyright (c) 2023 Authors and Global Journals Private Limited
This work is licensed under a Creative Commons Attribution 4.0 International License.