Modeling and Experimental Analysis of Effect of Tool Geometry on Single Point Incremental Sheet Metal Forming
Keywords:
single point incremental sheet forming, tool geometry, wall angle, contact area, forming limit
Abstract
Dieless manufacturing process involves progressive deformation of the sheet metal using a punch or tool During the incremental deformation process the sheet may or may not be supported on its back side There are various factors that affect the process of dieless sheet forming The objective of this work is to identify the effect of tool geometry on formability of sheet metal components in the case of single point incremental sheet metal forming For this purpose numbers of experiments have been performed with three different tool geometries which are spherical tool elliptical tool tip with straight diameter and elliptical tool tip with tapered diameter The entire exercise has also been simulated in virtual environment and a good correlation between the simulation and the experimental work is observed It has been observed that the results of the analysis would help to improve the selection of appropriate tool and obtain better forming limit for a given sheet metal
Downloads
- Article PDF
- TEI XML Kaleidoscope (download in zip)* (Beta by AI)
- Lens* NISO JATS XML (Beta by AI)
- HTML Kaleidoscope* (Beta by AI)
- DBK XML Kaleidoscope (download in zip)* (Beta by AI)
- LaTeX pdf Kaleidoscope* (Beta by AI)
- EPUB Kaleidoscope* (Beta by AI)
- MD Kaleidoscope* (Beta by AI)
- FO Kaleidoscope* (Beta by AI)
- BIB Kaleidoscope* (Beta by AI)
- LaTeX Kaleidoscope* (Beta by AI)
How to Cite
Published
2017-01-15
Issue
Section
License
Copyright (c) 2017 Authors and Global Journals Private Limited
This work is licensed under a Creative Commons Attribution 4.0 International License.