@incollection{,
	
					
					
					7FB55CDE1FFF4B39CEC715BEF552468C
				,
	author={{TanzilaLutfor} and {SohagSarker} and {Md. ZahangirAlam} and {Pabna University of Science and Technology}},
	journal={{Global Journal of Researches in Engineering}},
	journal={{GJRE}}2249-45960975-586110.34257/gjre,
	address={Cambridge, United States},
	publisher={Global Journals Organisation}1317711
}

@book{b0,
	
	
		,
	title={{DOE Simplified: practical tools for effective experimentation}}
		,
	author={{
			MJAnderson
		} and {
			PJWhitcomb
		}}
		
		
			,
	year={2016}
			,
	publisher={CRC Press}
		
	

}

@incollection{b1,
	
	
		,
	title={{Dry cutting study of an aluminum alloy (A2024-T351): a numerical and experimental approach}}
		,
	author={{
			MAsad
		} and {
			FGirardin
		} and {
			TMabrouki
		} and {
			JFRigal
		}}
		
		
		
	
	
		,
	journal={{International Journal of Material Forming}}
		
			1
			1
			
			,
	year={2008}
		
	

}

@incollection{b2,
	
	
		,
	title={{Failure modes and wear mechanisms of M35 high-speed steel drills when machining Inconel 901}}
		,
	author={{
			EOEzugwu
		} and {
			CJLai
		}}
		
	
	
		,
	journal={{Journal of materials processing technology}}
		
			49
			3-4
			
			,
	year={1995}
		
	

}

@incollection{b3,
	
	
		,
	title={{A study of the role of cutting fluid in machining operations}}
		,
	author={{
			SJBeaubien
		} and {
			AGCattaneo
		}}
		
	
	
		,
	journal={{Lubrication Engineering}}
		
			10
			
			,
	year={1964}
		
	

}

@incollection{b4,
	
	
		,
	title={{Performance evaluation of minimum quantity lubrication (MQL) in the drilling operation}}
		,
	author={{
			NM MAhsan
		} and {
			GMKibria
		} and {
			RMAhmed
		} and {
			AMIslam
		} and {
			MMHossain
		}}
		
		
		
		
	
	
		,
	booktitle={{International Conference on Mechanical, Industrial and Energy Engineering}}
				
			,
	year={2010. December}
			
		
	

}

@incollection{b5,
	
	
		,
	title={{Fluid minimization in cutting and grinding. Abrasives}}
		,
	author={{
			TBrockhoff
		} and {
			AWalter
		}}
		
	
	
		,
	journal={{Journal of Abrasives Engineering Society}}
		
			10
			11
			
			,
	year={1998}
		
	

}

@incollection{b6,
	
	
		,
	title={{The effect of extremely low lubricant volumes in machining}}
		,
	author={{
			ARMachado
		} and {
			JWallbank
		}}
		
	
	
		,
	journal={{Wear}}
		
			210
			1-2
			
			,
	year={1997}
		
	

}

@incollection{b7,
	
	
		,
	title={{Using a minimum quantity of lubricant (MQL) and a diamond coated tool in the drilling of aluminum-silicon alloys}}
		,
	author={{
			DUBraga
		} and {
			AEDiniz
		} and {
			GWMiranda
		} and {
			NLCoppini
		}}
		
		
		
	
	
		,
	journal={{Journal of Materials Processing Technology}}
		
			122
			1
			
			,
	year={2002}
		
	

}

@incollection{b8,
	
	
		,
	title={{Analysis of temperature during drilling of Ti6Al4V with a minimal quantity of lubricant}}
		,
	author={{
			RPZeilmann
		} and {
			WLWeingaertner
		}}
		
	
	
		,
	journal={{Journal of Materials Processing Technology}}
		
			179
			1
			
			,
	year={2006}
		
	

}

@book{b9,
	
	
		,
	title={{Minimum quantity lubrication in finish hard turning}}
		,
	author={{
			SYLiang
		} and {
			ARonan
		}}
		
		
			,
	year={2003}
			,
	address={Atlanta, GA, USA}
		
		
			Georgia Institute of Technology
		
	

}

@incollection{b10,
	
	
		,
	title={{Minimum quantity lubrication (MQL) applications in automotive power-train machining}}
		,
	author={{
			AFilipovic
		} and {
			DAStephenson
		}}
		
	
	
		,
	journal={{Machining Science and Technology}}
		
			10
			1
			
			,
	year={2006}
		
	

}

@book{b11,
	
	
		,
	author={{
			TRBement
		}}
		,
	title={{Taguchi techniques for quality engineering}}
				
			,
	year={1989}
		
	

}

@book{b12,
	
	
		,
	title={{Design of experiments using the Taguchi approach: 16 steps to product and process improvement}}
		,
	author={{
			RKRoy
		}}
		
			,
	year={2001}
			,
	publisher={John Wiley & Sons}
		
	

}

@book{b13,
	
	
		,
	title={{Performance analysis of Mild Steel (ASTM A36) further analysis of drilling Mild Steel (ASTM A36) and its performance measure. The obtained results can also be the asset in the respective field. It can easily be derived from the regression line equations what would be the performance for any drilling conditions}}
		
	
	,
	note={drill bit size, and RPM in the next successive operation}

}

@incollection{b14,
	
	
		,
	title={{The use of the Taguchi approach to determine the influence of injection-molding parameters on the properties of green parts}}
		,
	author={{
			BBerginc
		} and {
			ZKampus
		} and {
			BSustarsic
		}}
		
		
	
	
		,
	journal={{Journal of Achievements in Materials and Manufacturing Engineering}}
		
			15
			1-2
			
			,
	year={2006}
		
	

}

@incollection{b15,
	
	
		,
	title={{Optimal machining parameters for achieving the desired surface roughness in fine turning of cold pre-formed steel workpieces}}
		,
	author={{
			JKopa?
		} and {
			MBahor
		} and {
			MSokovi?
		}}
		
		
	
	
		,
	journal={{International Journal of Machine Tools and Manufacture}}
		
			42
			6
			
			,
	year={2002}
		
	

}

@incollection{b16,
	
	
		,
	title={{Optimal parameter design for chip-on-film technology using the Taguchi method}}
		,
	author={{
			MH CLi
		} and {
			SMHong
		}}
		
	
	
		,
	journal={{The International Journal of Advanced Manufacturing Technology}}
		
			25
			1
			
			,
	year={2005}
		
	

}

@incollection{b17,
	
	
		,
	title={{Optimisation of electron-beam surface hardening of cast iron for high wear resistance using the Taguchi method}}
		,
	author={{
			JMing-Der
		} and {
			TYih-Fong
		}}
		
	
	
		,
	journal={{The International Journal of Advanced Manufacturing Technology}}
		
			24
			3-4
			
			,
	year={2004}
		
	

}

@incollection{b18,
	
	
		,
	title={{Surface integrity of hardened steel parts in hybrid machining operations}}
		,
	author={{
			WGrzesik
		} and {
			JRech
		} and {
			TWanat
		}}
		
		
	
	
		,
	journal={{Journal of Achievements in Materials and Manufacturing Engineering}}
		
			18
			1-2
			
			,
	year={2006}
		
	

}

@incollection{b19,
	
	
		,
	title={{Design optimization of cutting parameters for turning operations based on the Taguchi method}}
		,
	author={{
			WPYang
		} and {
			YSTarng
		}}
		
	
	
		,
	journal={{Journal of materials processing technology}}
		
			84
			1
			
			,
	year={1998}
		
	

}

@incollection{b20,
	
	
		,
	title={{}}
		,
	author={{
			JHLemelson
		}}
	
	
		,
	booktitle={{U.S. Patent}}
		
			3
			,
	year={1967}
		
		
			U.S. Patent and Trademark Office
		
	

}

@incollection{b21,
	
	
		,
	title={{An interactive process planning system for prismatic parts (ICAPP)}}
		,
	author={{
			HEskicioglu
		} and {
			BJDavies
		}}
		
	
	
		,
	journal={{CIRP Annals-Manufacturing Technology}}
		
			32
			1
			
			,
	year={1983}
		
	

}

@book{b22,
	
	
		,
	author={{
			RRKibbe
		} and {
			WTWhite
		} and {
			ROMeyer
		} and {
			KCurran
		} and {
			JStenerson
		}}
		
		
		
		
		,
	title={{Machine tool practices}}
				
			,
	publisher={Pearson}
			,
	year={2014}
		
	

}

@incollection{b23,
	
	
		,
	title={{Effects of minimum quantity lubrication on turning AISI 9310 alloy steel using vegetable oilbased cutting fluid}}
		,
	author={{
			MM AKhan
		} and {
			MA HMithu
		} and {
			NRDhar
		}}
		
		
	
	
		,
	journal={{Journal of materials processing Technology}}
		
			209
			15
			
			,
	year={2009}
		
	

}

@book{b24,
	
	
		,
	title={{Diffusion in the condensed state}}
		,
	author={{
			JSKirkaldy
		} and {
			DJYoung
		}}
		
		
			,
	year={1987}
			527
			,
	address={London}
		
	

}

@incollection{b25,
	
	
		,
	title={{Optimization of Metal Removal Rate for ASTM A48 Grey Cast Iron in Turning Operation Using Taguchi Method}}
		,
	author={{
			MMIslam
		} and {
			SSHossain
		} and {
			MS ABhuyan
		}}
		
		
	
	
		,
	journal={{International Journal of Materials Science and Engineering}}
		
			3
			
			,
	year={2015}
		
	

}