@incollection{,
	
					
					
					B0184DDBB52D0648A21027C0178670FA
				,
	author={{Dr. MamunA} and {Bangladesh University of Engineering and Technology}},
	journal={{Global Journal of Researches in Engineering}},
	journal={{GJRE}}2249-45960975-586110.34257/gjre,
	address={Cambridge, United States},
	publisher={Global Journals Organisation}1252737
}

@incollection{b0,
	
	
		,
	title={{Effect of Cutting Fluid upon Chip-Tool Interface Temperature}}
		,
	author={{
			MCShaw
		} and {
			JDPiggtt
		} and {
			LPRichardson
		}}
		
		
	
	
		,
	journal={{Trans. ASME}}
		
			71
			
			,
	year={1951}
		
	

}

@incollection{b1,
	
	
		,
	title={{Beneficial Effects of Cryogenic Cooling over Dry and Wet Machining on Tool Wear and Surface Finish in Turning AISI 1060 Steel}}
		,
	author={{
			SPaul
		} and {
			NRDhar
		} and {
			ABChattopadhyay
		}}
		
		
	
	
		,
	booktitle={{Proc. of ICAMT-2000}}
				of ICAMT-2000Malaysia
		
			,
	year={2000}
			
		
	

}

@incollection{b2,
	
	
		,
	title={{Effect of minimum quantity lubrication (MQL) on tool wear and surface roughness in turning AISI-4340 steel}}
		,
	author={{
			NRDhar
		} and {
			MKamruzzaman
		} and {
			MAhmed
		}}
		
		
	
	
		,
	journal={{Journal of Materials Processing Technology}}
		
			172
			
			,
	year={2006}
		
	

}

@incollection{b3,
	
	
		,
	title={{Lubrication Action of Cutting Fluids}}
		,
	author={{
			CCassin
		} and {
			GBoothroyd
		}}
		
	
	
		,
	journal={{Journal of Mechanical Engineering and Science}}
		
			7
			1
			,
	year={1965}
		
	

}

@incollection{b4,
	
	
		,
	title={{Metal Machining with High Pressure Water-jet Cooling Assistance-A New Possibility}}
		,
	author={{
			MMazurkiewicz
		} and {
			ZKubala
		} and {
			JChow
		}}
		
		
	
	
		,
	journal={{Journal of Engineering for Industry}}
		
			111
			
			,
	year={1989}
		
	

}

@incollection{b5,
	
	
		,
	title={{Hard Turning with Minimum Cutting Fluid: A Viable Green Alternative on the Shop Floor}}
		,
	author={{
			AAlexander
		} and {
			ASVaradarajan
		} and {
			PKPhilip
		}}
		
		
	
	
		,
	booktitle={{Proceedings of the 18th AIMTDR}}
				the 18th AIMTDR
		
			,
	year={1998}
			
		
	

}

@incollection{b6,
	
	
		,
	title={{Dry machining-principles and applications}}
		,
	author={{
			EKalhofer
		}}
	
	
		,
	booktitle={{Proceedings of the 2nd Seminario International de Alta Tecnologia UNIMEP}}
				the 2nd Seminario International de Alta Tecnologia UNIMEPSanta Barbara D'Oeste, SP, Brazil, Julho
		
			,
	year={1997}
		
	

}

@incollection{b7,
	
	
		,
	title={{Warnings for grinding coolants}}
		,
	author={{
			AAnon
		}}
	
	
		,
	booktitle={{Metalworking Production}}
				
			,
	year={2003}
			147
			44
		
	

}

@incollection{b8,
	
	
		,
	title={{New hard/lubricant coating for dry machining}}
		,
	author={{
			VDerflinger
		} and {
			HBrandle
		} and {
			HZimmermann
		}}
		
		
	
	
		,
	booktitle={{Surface Coating Technology}}
				
			,
	year={1999}
			113
			
		
	

}

@incollection{b9,
	
	
		,
	title={{Possibilities for the disposal of grinding swarf}}
		,
	author={{
			EBrinksmeier
		} and {
			JEckebrecht
		}}
		
	
	
		,
	journal={{CIRP Annals-Manufacturing Technology}}
		
			43
			2
			
			,
	year={1994}
		
	

}

@incollection{b10,
	
	
		,
	title={{The Minimum Quantity Lubricant Technique and its Application in the Cutting Process}}
		,
	author={{
			UHeisel
		} and {
			DLutz
		} and {
			RWassmer
		} and {
			UWalter
		}}
		
		
		
	
	
		,
	booktitle={{Machines and Metals Magazine}}
				Brazil
		
			,
	year={1998. February}
			
		
	

}

@incollection{b11,
	
	
		,
	title={{Technology Environmentally Correct for Intern Cylindrical Grinding}}
		,
	author={{
			DHafenbraedl
		} and {
			SMalkin
		}}
		
	
	
		,
	booktitle={{Machines and Metals Magazine}}
				
			,
	year={2001. July}
			426
			
		
	

}

@incollection{b12,
	
	
		,
	title={{Effects and mechanisms in minimal quantity lubrication machining of an aluminum alloy}}
		,
	author={{
			FItoigawa
		} and {
			TH CChilds
		} and {
			TNakamura
		} and {
			WBelluco
		}}
		
		
		
	
	
		,
	journal={{WEAR}}
		
			260
			3
			
			,
	year={2006}
		
	

}

@incollection{b13,
	
	
		,
	title={{An Experimental Investigation into the Effect of Minimum Quality Lubricant on Cutting Temperature for machinability of AISI 9310 Steel Alloy}}
		,
	author={{
			MMRahman
		} and {
			MM AKhan
		} and {
			NRDhar
		}}
		
		
	
	
		,
	journal={{European Journal of Scientific Research}}
		
			29
			4
			
			,
	year={2009}
		
	

}

@incollection{b14,
	
	
		,
	title={{MQL applications in grinding of 16mncr5 steel: A comparison with wet and dry grinding}}
		,
	author={{
			NRDhar
		} and {
			MHossain
		} and {
			MKamruzzaman
		}}
		
		
		ICME 05-AM-33
	
	
		,
	booktitle={{Proceedings of the International Conference on Mechanical Engineering}}
				the International Conference on Mechanical EngineeringDhaka, Bangladesh
		
			,
	year={2005. 2005}
		
	

}

@incollection{b15,
	
	
		,
	title={{Analysis of surface integrity for minimum quantity lubricant-MQL in grinding}}
		,
	author={{
			LRSilva
		} and {
			ECBianchi
		} and {
			RECatai
		} and {
			RYFusse
		} and {
			TVFranc -A
		} and {
			PRAguiar
		}}
		
		
		
		
		
	
	
		,
	journal={{International Journal of Machine Tools and Manufacture}}
		
			47
			
			,
	year={2007}
		
	

}

@incollection{b16,
	
	
		,
	title={{An experimental investigation of the effects of workpiece and grinding parameters on minimum quantity lubrication-MQL grinding}}
		,
	author={{
			TTawakoli
		} and {
			MJHadad
		} and {
			MHSadeghi
		} and {
			ADanesh
		} and {
			SStockert
		} and {
			ARasifard
		}}
		
		
		
		
		
	
	
		,
	journal={{International Journal of Machine Tools & Manufacture}}
		
			49
			
			,
	year={2009}
		
	

}

@incollection{b17,
	
	
		,
	title={{A study of plane surface grinding under minimum quantity lubrication (MQL) conditions}}
		,
	author={{
			LMBarczak
		} and {
			ADBatako
		} and {
			MNMorgan
		}}
		
		
	
	
		,
	journal={{International Journal of Machine Tools and Manufacture}}
		
			50
			11
			
			,
	year={2010}
		
	

}

@incollection{b18,
	
	
		,
	title={{A probabilistic approach to predict surface roughness in ceramic grinding}}
		,
	author={{
			PAgarwal Sanjay
		} and {
			Venkateswara
		} and {
			Rao
		}}
		
		
	
	
		,
	journal={{International Journal of Machine Tools & Manufacture}}
		
			45
			
			,
	year={2005}
		
	

}

@incollection{b19,
	
	
		,
	title={{Analysis of transient temperatures in grinding}}
		,
	author={{
			CGuo
		} and {
			SMalkin
		}}
		
	
	
		,
	journal={{Journal of Engineering for Industry}}
		
			117
			
			,
	year={1995}
		
	

}

@incollection{b20,
	
	
		,
	title={{Thermal Modelling of Surface Grinding Using Implicit Finite Element Techniques}}
		,
	author={{
			AGMamalis
		} and {
			JKundra´k
		} and {
			DEManolakos
		} and {
			KGyani
		} and {
			AMarkopoulos
		}}
		
		
		
		
	
	
		,
	journal={{International Journal of Advance Manufacturing Technologies}}
		
			21
			
			,
	year={2003}
		
	

}

@incollection{b21,
	
	
		,
	title={{Temperature distribution in workpiece during scratching and grinding}}
		,
	author={{
			JingLi
		} and {
			JC MLi
		}}
		
	
	
		,
	journal={{International Journal of Materials Science and Engineering}}
		
			409
			
			,
	year={2005}
		
	

}

@incollection{b22,
	
	
		,
	title={{Comparison of numerically and analytically predicted contact temperatures in shallow and deep dry grinding with infrared measurements}}
		,
	author={{
			DAnderson
		} and {
			AWarkentin
		} and {
			RBauer
		}}
		
		
	
	
		,
	journal={{International Journal of Machine Tools & Manufacture}}
		
			48
			
			,
	year={2008}
		
	

}

@incollection{b23,
	
	
		,
	title={{Experimental validation of numerical thermal models for dry grinding}}
		,
	author={{
			DAnderson
		} and {
			AWarkentin
		} and {
			RBauer
		}}
		
		
	
	
		,
	journal={{journal of materials processing technology}}
		
			204
			
			,
	year={2008}
		
	

}

@incollection{b24,
	
	
		,
	title={{Temperature measurement in high efficiency deep grinding}}
		,
	author={{
			WBRowe
		} and {
			ADBatako
		} and {
			WBRowe
		} and {
			MNMorgan
		}}
		
		
		
	
	
		,
	journal={{International Journal of Machine Tools and Manufacture}}
		
			41
			1
			
			,
	year={2001. 2005}
		
	
	,
	note={International Journal of Machine Tools & Manufacture}

}

@book{b25,
	
	
		,
	title={{Numerical Modeling of Surface Roughness in Grinding under Minimum Quantity Lubricants (MQL) using Response Surface Method}}
		
	
	,
	note={RSM}

}