@incollection{,
	
					
					
					2CBEBB20B12252CAC249EF6A01898617
				,
	author={{Wellington Augusto DosSantos} and {Etiene Pereira deAndrade} and {Guilherme SouzaAssunção} and {Gilmar Cordeiro  daSilva}},
	journal={{Global Journal of Researches in Engineering}},
	journal={{GJRE}}2249-45960975-586110.34257/gjre,
	address={Cambridge, United States},
	publisher={Global Journals Organisation}2014759
}

@book{b0,
	
	
		,
	title={{}}
		,
	author={{
			T;Meinders
		} and {
			Berg
		} and {
			Van Den
		}}
		
		
		
	

}

@incollection{b1,
	
	
		,
	title={{Deep drawing simulations of Tailor Blanks and experimental verification}}
		,
	author={{
			JHuétink
		}}
	
	
		,
	journal={{Journal of Materials Processing Technology}}
		
			
			,
	year={jun. 2000}
			,
	publisher={Elsevier BV}
		
	
	,
	note={s.l.], v. 103, n. 1}

}

@book{b2,
	
	
		,
	title={{}}
		,
	author={{
			GuilhermeAssunção
		} and {
			Souza
		}}
		
		
	

}

@book{b3,
	
	
		,
	title={{}}
		,
	author={{
			EtieneAndrade
		} and {
			Pereira De
		}}
		
		
	

}

@book{b4,
	
	
		,
	title={{}}
		,
	author={{
			WellingtonSantos
		} and {
			Augusto Dos
		}}
		
		
	

}

@book{b5,
	
	
		,
	title={{Caracterização Mecânica da Região Soldada de Tailor Welded Blanks (TWB) a Partir do Perfil de Microdureza}}
		,
	author={{
			IvanilzaFelizardo
		} and {
			;Felizardo
		} and {
			AlexandreBracarense
		} and {
			Queiroz Bracarense
		}}
		
		
		
		
	

}

@book{b6,
	
	
		,
	title={{}}
		,
	author={{
			&Soldagem
		} and {
			Inspeção
		}}
		
		10.1590/0104-9224/si24.32
		
		
			,
	year={2019}
			
		
	
	,
	note={s.l.], v. 24}

}

@incollection{b7,
	
	
		,
	title={{Caracterização Mecânica e Análise Microestrutural de Chapas Obtidas pelo Processo de Tailor Welded Blank (TWB). Soldagem & Inspeção}}
		,
	author={{
			EtieneAndrade
		} and {
			;Pereira De
		} and {
			GuilhermeAssunção
		} and {
			;Souza
		} and {
			WellingtonSantos
		} and {
			;Augusto Dos
		} and {
			IvanilzaFelizardo
		} and {
			;Felizardo
		} and {
			AlexandreBracarense
		} and {
			Queiroz Bracarense
		}}
		
		
		
		
		
		
		
		
		
		10.1590/0104-9224/si24.25
		
	
	
		,
	journal={{FapUNIFESP}}
		
			
			,
	year={nov. 2019}
		
	
	,
	note={s.l.], v. 24}

}

@incollection{b8,
	
	
		,
	title={{Experimental and numerical study of machined aluminum tailor made blanks}}
		,
	author={{
			AAZadpoor
		} and {
			JSinke
		} and {
			RBenedictus
		}}
		
		
	
	
		,
	journal={{Journal of Materials Processing Technology}}
		
			
			,
	year={2008. 200}
		
	

}

@incollection{b9,
	
	
		,
	title={{A review on the laser welding of coated 22MnB5 press-hardened steel and its impact on the production of tailor-welded blanks}}
		,
	author={{
			MShehryar Khan
		} and {
			MHRazmpoosh
		} and {
			EBiro
		} and {
			& YZhou
		}}
		
		
		
		10.1080/13621718.2020.1742472
		
	
	
		,
	journal={{Science and Technology of Welding and Joining}}
		
			,
	year={2020. 26 Mar 2020}
		
	

}

@book{b10,
	
	
		,
	title={{Estudo dos Parâmetros de Influência na simulação numérica de estampagens de Chapas. Dissertação de Mestrado. Curso de Pós-Graduação em Engenharia Metalúrgica e de Minas}}
		,
	author={{
			LCDos Reis
		}}
		
			,
	year={2002}
		
	

}

@book{b11,
	
	
		,
	title={{}}
		,
	author={{
			AmitKumar
		} and {
			Rana
		}}
		
		
	

}

@book{b12,
	
	
		,
	title={{}}
		,
	author={{
			SuchibrataDatta
		}}
		
	

}

@book{b13,
	
	
		,
	title={{Deformation behaviour during deep drawing operation under simple loading path: A simulation study}}
		,
	author={{
			SanjibKundu
		}}
		10.1016/j.matpr.2019.12.413
		
		
			,
	year={31 December 2019}
			,
	publisher={Elsevier BV}
		
	
	,
	note={s.1], V. 2; n.3, p. 1?6}

}

@incollection{b14,
	
	
		,
	title={{Caracterização mecânica e análise de falhas de chapas fabricadas pelo processo de Tailor Welded Blank submetidas a estampagem profunda}}
		,
	author={{
			EtieneAndrade
		} and {
			SantosPereira De
		} and {
			WellingtonAugusto Dos
		} and {
			;Bracarense
		} and {
			AlexandreQueiroz
		}}
		
		
		
		
	
	
		,
	booktitle={{ABM Proceedings}}
				
			
		
	
	,
	note={s.l.}

}

@book{b15,
	
	
		,
	title={{AUTOFORM PLUS R3.1®: Software for Sheet Metal Forming. AutoForm Engineering GmbH}}
				
			,
	year={2011}
		
	

}

@book{b16,
	
	
		,
	title={{}}
		,
	author={{
			AZadpoor
		}}
		
	

}

@book{b17,
	
	
		,
	title={{}}
		,
	author={{
			JSinke
		}}
		
	

}

@book{b18,
	
	
		,
	title={{Numerical simulation modeling of tailor welded blank forming. Materials Innovation Institute (M2i) and Delft University of Technology}}
		,
	author={{
			RBenedictus
		}}
		
			,
	year={2011. 2011Woodhead}
			,
	publisher={Publishing Limited}
			
			,
	address={the Netherlands}
		
	

}

@book{b19,
	
	
		,
	title={{}}
		,
	author={{
			YongChan Hur
		}}
		
	

}

@book{b20,
	
	
		,
	title={{}}
		,
	author={{
			YongChan Hur
		}}
		
	

}

@book{b21,
	
	
		,
	title={{}}
		,
	author={{
			KimByung Min
		}}
		
	

}

@book{b22,
	
	
		,
	title={{}}
		,
	author={{
			Myoung-Gyu
		}}
		
	

}

@incollection{b23,
	
	
		,
	title={{MEASUREMENT OF WELD ZONE PROPERTIES OF LASER-WELDED TAILOR-WELDED BLANKS AND ITS APPLICATION TO DEEP DRAWING. 2020 KSAE/ 115?08 pISSN}}
		,
	author={{
			Ji HoonKim
		}}
		10.1007/s12239?020?0058
		
	
	
		,
	journal={{International Journal of Automotive Technology}}
		
			,
	year={30 January 2019}
		
	
	,
	note={s.1], V. 21; n.3, p. 615?622}

}

@book{b24,
	
	
		,
	title={{}}
		,
	author={{
			HosseinMoayedi
		}}
		
	
	,
	note={Roya Darabi}

}

@book{b25,
	
	
		,
	title={{}}
		,
	author={{
			AriaGhabussi
		}}
		
	

}

@book{b26,
	
	
		,
	title={{}}
		,
	author={{
			MostafaHabibi
		}}
		
	

}

@book{b27,
	
	
		,
	title={{Weld orientation effects on the formability of tailor welded thin steel sheets, ScienceDirect}}
		,
	author={{
			LokeKok Foong H
		}}
		10.1016/j.tws.2020.106669
		
		
			,
	year={15 February 2020}
			,
	publisher={Elsevier BV}
			
		
	
	,
	note={s.1}

}

@incollection{b28,
	
	
		,
	title={{Multiple-iteration spring back compensation of tailor welded blanks during stamping forming process}}
		,
	author={{
			HWang
		} and {
			JZhou
		} and {
			TSZhao
		} and {
			LZLiu
		} and {
			QLiang
		}}
		
		
		
		
	
	
		,
	journal={{Materials & Design}}
		
			102
			
			,
	year={jul. 2016}
		
	
	,
	note={s.l.}

}

@book{b29,
	
	
		,
	title={{}}
		,
	author={{
			MingF ;Shi
		} and {
			KenM ;Pickett
		} and {
			Bhatt
		} and {
			KKumar
		}}
		
		
		
		
	

}

@incollection{b30,
	
	
		,
	title={{Formability Issues in the Application of Tailor Welded Blank Sheets. Sae Technical Paper Series}}
	
	
		,
	booktitle={{SAE International. 15. PANDA}}
				
			,
	year={1 mar. 1993}
			
		
	
	,
	note={s.l.. Sushanta Kumar}

}

@book{b31,
	
	
		,
	title={{}}
		,
	author={{
			DKumar
		} and {
			Ravi
		}}
		
		
	

}

@incollection{b32,
	
	
		,
	title={{Characterization of tensile properties of tailor welded IF steel sheets and their formability in stretch forming}}
		,
	author={{
			Harish;Kumar
		} and {
			AKNath
		}}
		
	
	
		,
	journal={{Journal Of Materials Processing Technology}}
		
			
			,
	year={mar. 2007}
			,
	publisher={Elsevier BV}
		
	
	,
	note={s.l.], v. 183, n. 2-3}

}

@incollection{b33,
	
	
		,
	title={{Determination of forming limit curve in two-layer metallic sheets using the finite element simulation}}
		,
	author={{
			Karajibani
		} and {
			;Ehsan
		} and {
			Hashemi
		} and {
			;Ramin
		} and {
			MohammadSedighi
		}}
		
		
		
		
	
	
		,
	journal={{Proceedings of the Institution of Mechanical Engineers}}
		
			
			,
	year={2016}
			,
	publisher={SAGE Publications}
		
	
	,
	note={Part L: Journal of Materials. s.l.], v. 230, n. 6}

}

@book{b34,
	
	
		,
	title={{Conformação Plástica Dos Metais. 6. ed. Campinas: Epusp}}
		,
	author={{
			BrescianiFilho
		} and {
			Ettore
		}}
		
		
			,
	year={2011}
			254
		
	

}

@book{b35,
	
	
		,
	title={{Mechanical metallurgy. 3 Ed}}
		,
	author={{
			GEDieter
		}}
		
			,
	year={1988}
			,
	publisher={McGraw-Hill}
			,
	address={Boston}
		
	

}

@incollection{b36,
	
	
		,
	title={{Effect of beam size in laser welding of ultra-thin stainless steel foils}}
		,
	author={{
			Jaehun;Kim
		} and {
			Kim
		} and {
			;Sanseo
		} and {
			Kim
		} and {
			;Keunug
		} and {
			Jung
		} and {
			;Wonyeong
		} and {
			Youn
		} and {
			;Deokhyun
		} and {
			Lee
		} and {
			;Jangseok
		} and {
			HyungsonKi
		}}
		
		
		
		
		
		
		
		
		
		
		
	
	
		,
	journal={{Journal Of Materials Processing Technology}}
		
			233
			
			,
	year={jul. 2016}
			,
	publisher={Elsevier BV}
		
	
	,
	note={s.l.}

}

@incollection{b37,
	
	
		,
	title={{Effect of Thickness Ratio on Weld Line Displacement in Deep Drawing of Aluminium Steel Tailor Welded Blanks}}
		,
	author={{
			Arman;Khan
		} and {
			VV NSuresh
		} and {
			;Satya
		} and {
			SrinivasaRegalla
		} and {
			Prakash
		}}
		
		
		
		
	
	
		,
	journal={{Procedia Materials Science}}
		
			6
			
			,
	year={2014}
			,
	publisher={Elsevier BV}
		
	
	,
	note={s.l.}

}

@book{b38,
	
	
		,
	title={{Combined effect of thickness ratio and selective heating on weld line movement in stamped tailor-welded blanks. Materials And Manufacturing Processes}}
		,
	author={{
			VV NSuresh
		} and {
			;Satya
		} and {
			SrinivasaRegalla
		} and {
			;Prakash
		} and {
			AmitGupta
		} and {
			Kumar
		}}
		
		
		
		
		
		
			,
	year={10 nov. 2016}
			,
	publisher={Informa UK Limited}
			
		
	
	,
	note={s.l.], v. 32, n. 12}

}

@book{b39,
	
	
		,
	title={{}}
		,
	author={{
			WilliamD ;Callister
		} and {
			DavidGRethwisch
		}}
		
		
	

}

@book{b40,
	
	
		,
	title={{São Paulo: LTC: GEN -Grupo Editorial Nacional}}
				
			,
	year={2016}
			912
		
		
			Ciência e Engenharia de
		
	
	,
	note={Materiais: Uma Introdução. 9}

}

@book{b41,
	
	
		,
	title={{Fundamentos da conformação: mecânica dos metais. 2. ed. São Paulo: Artliber}}
		,
	author={{
			PRCetlin
		} and {
			HHelman
		}}
		
		
			,
	year={2005}
		
	
	,
	note={265 p}

}

@book{b42,
	
	
		,
	title={{The effects of strength ratio on the forming limit diagram of tailor-welded blanks}}
		,
	author={{
			RSafdarian
		}}
		
	

}

@incollection{b43,
	
	
		,
	title={{}}
	
	
		,
	journal={{Ironmaking & Steelmaking}}
		
			27
			
			,
	year={2016}
			,
	publisher={Informa UK Limited}
		
	
	,
	note={s.l.], v. 45, n. 1}

}

@book{b44,
	
	
		,
	title={{}}
		,
	author={{
			SlimaneAbdelkader
		}}
		
	

}

@incollection{b45,
	
	
		,
	title={{}}
	
	
		,
	journal={{Benattou Bouchouicha}}
		
	

}

@book{b46,
	
	
		,
	title={{}}
		,
	author={{
			MohamedBenguediab
		}}
		
	

}

@book{b47,
	
	
		,
	title={{}}
		,
	author={{
			Sid-AhmedSlimaneb
		}}
		
			,
	year={2015}
		
	

}

@book{b48,
	
	
		,
	author={{
			Gurson-Tvergaard
		}}
		,
	title={{Needleman model of structures in carbon steel A48-AP. Brazilian Metallurgical, Materials and Mining Association}}
				
			,
	publisher={Elsevier BV}
			,
	year={2015}
			
		
	

}

@incollection{b49,
	
	
		,
	title={{Forming Limit Diagram Prediction of AISI 304-St 12.Tailor Welded Blanks Using GTN Damage Model}}
		,
	author={{
			RSafdarian
		}}
		10.1520/JTE20180069
		
	
	
		,
	journal={{Journal of Testing and Evaluation}}
		
			
			,
	year={January 15. 2019}
			,
	publisher={ASTM International}
		
	
	,
	note={s.1], V.2, n.1}

}

@book{b50,
	
	
		,
	author={{
			WilliamF ;Hosford
		} and {
			RobertMCaddell
		}}
		
		,
	title={{Metal Forming: Mechanics and Metallurgy. 3}}
				Nova Iorque
		
			,
	publisher={Cambridge University Press}
			,
	year={2007}
			312
		
	

}

@book{b51,
	
	
		,
	title={{Tailor welded blanks for advanced manufacturing}}
		,
	author={{
			BradL ;Kinsey
		} and {
			XinWu
		}}
		
		
			,
	year={2011}
			,
	publisher={Woodhead Publishing Limited}
			217
			,
	address={Cambridge}
		
	

}

@book{b52,
	
	
		,
	title={{}}
		,
	author={{
			Vijay;Gautam
		} and {
			VinayakRaut
		} and {
			Manohar
		}}
		
		
		
	

}

@incollection{b53,
	
	
		,
	title={{Analytical prediction of spring back in bending of tailor-welded blanks incorporating effect of anisotropy and weld zone properties}}
		,
	author={{
			DKumar
		} and {
			Ravi
		}}
		
	
	
		,
	journal={{Proceedings of the Institution of Mechanical Engineers}}
		
			
			,
	year={4 jan. 2016}
			,
	publisher={SAGE Publications}
		
	
	,
	note={Part L: Journal of Materials. s.l.], v. 232, n. 4}

}

@incollection{b54,
	
	
		,
	title={{Experimental and Numerical Studies on Formability of Tailor Welded Blanks of High Strength Steel}}
		,
	author={{
			Vijay;Gautam
		} and {
			ArvindKumar
		}}
		
	
	
		,
	booktitle={{Procedia Manufacturing}}
				edia Manufacturing
		
			,
	publisher={Elsevier BV}
			,
	year={2019}
			29
			
		
	
	,
	note={s.l.}

}

@incollection{b55,
	
	
		,
	title={{A Novel Approach to the Determination of Forming Limit Diagrams for Tailor-Welded Blanks}}
		,
	author={{
			Mamusi
		} and {
			;Hossein
		} and {
			Masoumi
		} and {
			;Abolfazl
		} and {
			Hashemi
		} and {
			;Ramin
		} and {
			RamazanaliMahdavinejad
		} and {
			RKorouyeh
		} and {
			;Safdarian
		} and {
			HNaeini
		} and {
			Moslemi
		}}
		
		
		
		
		
		
		
		
		
		
	
	
		,
	journal={{Journal of Materials Engineering and Performance}}
		
			33
			
			,
	year={27 jun. 2013}
			,
	publisher={Springer}
		
	
	,
	note={Nature}

}

@incollection{b56,
	
	
		,
	title={{Experimental and theoretical investigation of thickness ratio effect on the formability of tailor welded blank}}
		,
	author={{
			MJTorkamany
		} and {
			GhLiaghat
		}}
		
	
	
		,
	journal={{Optics & Laser Technology}}
		
			51
			
			,
	year={2013}
			,
	publisher={Elsevier BV}
		
	
	,
	note={s.l.}

}

@book{b57,
	
	
		,
	title={{Caracterização mecânica e análise microestrutural de chapas obtidas pelo processo de Tailor Welded Blank (TWB). 2019. 115 f. Dissertação (Mestrado) -Curso de Engenharia Mecânica}}
		,
	author={{
			EtieneAndrade
		} and {
			Pereira De
		}}
		
		
			,
	year={2019}
			,
	address={Belo Horizonte}
		
		
			PPGMEC, Universidade Federal de Minas Gerais
		
	

}

@incollection{b58,
	
	
		,
	title={{Tensile testing for weld deformation properties in similar gage tailor welded blanks using the rule of mixtures}}
		,
	author={{
			KAbdullah
		} and {
			PMWild
		} and {
			JJJeswiet
		} and {
			AGhasempoor
		}}
		
		
		
	
	
		,
	journal={{Journal Of Materials Processing Technology}}
		
			
			,
	year={2001}
			,
	publisher={Elsevier BV}
		
	
	,
	note={s.l.], v. 112, n. 1}

}

@book{b59,
	
	
		,
	title={{In: AFFONSO, Luiz Otávio Amaral. Machinery Failure Analysis Handbook: Sustain Your Operations and Maximize Uptime}}
		,
	author={{
			Luiz OtávioAffonso
		} and {
			Amaral
		}}
		
		
			,
	year={2007}
			,
	publisher={Gulf Publishing Company}
			
			,
	address={Houston}
		
	
	,
	note={Ductile and Brittle Fractures}

}

@book{b60,
	
	
		,
	title={{AMERICAN SOCIETY FOR TESTING AND MATERIALS. ASTM E8/E8M: Standard Test Methods for Tension Testing of Metallic Materials}}
				Conshohocken
		
			,
	publisher={ASTM International}
			,
	year={2016}
			16
		
	

}

@book{b61,
	
	
		,
	title={{Estudo do Efeito das Condições de Processamento Mecânico na Transformação de fases do aço inoxidável AISI -Centro Federal de Educação Tecnológica de Minas Gerais}}
		,
	author={{
			EtieneAndrade
		} and {
			Pereira De
		}}
		
		
			,
	year={2015}
			,
	address={Belo Horizonte}
		
	

}

@incollection{b62,
	
	
		,
	title={{Comparative study of laser welding in tailor blanks for the automotive industry}}
		,
	author={{
			Assunção
		} and {
			;Eurico
		} and {
			Quintino
		} and {
			;Luisa
		} and {
			RosaMiranda
		}}
		
		
		
		
	
	
		,
	journal={{The International Journal of Advanced Manufacturing Technology}}
		
			
			,
	year={17 nov. 2009}
			,
	publisher={Springer}
		
	
	,
	note={s.l.], v. 49, n. 1-4}

}

@incollection{b63,
	
	
		,
	title={{Validation of a model for static and dynamic recrystallization in metals}}
		,
	author={{
			ArthurA ;Brown
		} and {
			DouglasJBammann
		}}
		
	
	
		,
	journal={{International Journal of Plasticity}}
		
			
			,
	year={2012}
		
	
	,
	note={s.l.}

}

@book{b64,
	
	
		,
	title={{}}
		,
	author={{
			BVElsevier
		}}
		10.1016/j.ijplas.2011.12.006
		
		
	

}

@book{b65,
	
	
		,
	title={{Estudo Numérico e Analítico das Evoluções da Força e da Espessura em Chapas de Aço Livre de Intersticiais Durante Processamento por Embutimento e Ironing}}
		,
	author={{
			FredericoCastro
		} and {
			De Magalhães
		}}
		
		
			,
	year={2005. 2005}
			63
			,
	address={Belo Horizonte}
		
		
			Dissertação (Mestrado) -Universidade Federal de Minas Gerais
		
	

}

@book{b66,
	
	
		,
	title={{Cleavage and Ductile Fracture Mechanisms: The Microstructural Basis of Fracture Toughness}}
		,
	author={{
			CK HDharan
		} and {
			BSKang
		} and {
			IainFinnie
		}}
		
		
		,
	editor={DHARAN, C. K. H. and KANG, B. S. and FINNIE,}
		
		
		
			,
	year={2016}
			,
	publisher={Springer}
			
			,
	address={Nova Iorque}
		
	
	,
	note={Iain. Finnie's Notes on Fracture Mechanics: Fundamental and Practical Lessons}

}

@book{b67,
	
	
		,
	title={{}}
		,
	author={{
			Duan
		} and {
			;Libin
		} and {
			Xiao
		} and {
			Ning-Cong
		}}
		
		
		
		
	

}

@incollection{b68,
	
	
		,
	title={{Bending analysis and design optimization of tailor-rolled blank thin-walled structures with top-hat sections}}
		,
	author={{
			Guangyao; XuLi
		} and {
			;Fengxiang
		} and {
			Chen
		} and {
			;Tao
		} and {
			AiguoCheng
		}}
		
		
		
		
	
	
		,
	journal={{International Journal Of Crashworthiness}}
		
			
			,
	year={8 nov. 2016}
			,
	publisher={Informa UK Limited}
		
	
	,
	note={s.l.], v. 22, n. 3}

}

@incollection{b69,
	
	
		,
	title={{Investigation of The Effects of Process Parameters on The Welding Line Movement in Deep Drawing of Tailor Welded Blanks}}
		,
	author={{
			AliFazli
		}}
	
	
		,
	journal={{International Journal of Advanced Design and Manufacturing Technology}}
		
			9
			
		
	
	,
	note={s.l.. abr. 2016. TWB}

}

@book{b70,
	
	
		,
	title={{}}
		,
	author={{
			Gong
		} and {
			;Hongying
		} and {
			Wang
		} and {
			;Sifan
		} and {
			PaulKnysh
		}}
		
		
		
		
		
	

}

@incollection{b71,
	
	
		,
	title={{Experimental investigation of the mechanical response of laser-welded dissimilar blanks from advanced-and ultra-high-strength steels}}
		,
	author={{
			YannisPKorkolis
		}}
	
	
		,
	journal={{Materials & Design}}
		
			
			,
	year={jan. 2016}
			,
	publisher={Elsevier BV}
		
	
	,
	note={s.l.], v. 90}

}

@incollection{b72,
	
	
		,
	title={{47. INTERNATIONAL ORGANIZATION FOR STANDARDIZATION. 6892-1: Metallic materials -Tensile testing -Part 1: Method of test at room temperature}}
		,
	author={{
			He
		} and {
			;Sijun
		} and {
			Wu
		} and {
			;Xin
		} and {
			SHu
		} and {
			Jack
		}}
		
		
		
		
		
	
	
		,
	journal={{Journal of Manufacturing Science and Engineering}}
		
			
			,
	year={2003}
			,
	publisher={ASME International}
		
	
	,
	note={Formability Enhancement for Tailor-Welded Blanks Using Blank Holding Force Control. 2 ed. Geneva: ISO, 2016. 79 p}

}

@book{b73,
	
	
		,
	title={{}}
		,
	author={{
			RKorouyeh
		} and {
			;Safdarian
		} and {
			HNaeini
		} and {
			Moslemi
		}}
		
		
		
		
	

}

@incollection{b74,
	
	
		,
	title={{Experimental and theoretical investigation of thickness ratio effect on the formability of tailor welded blank}}
		,
	author={{
			MJTorkamany
		} and {
			GhLiaghat
		}}
		
	
	
		,
	journal={{Optics & Laser Technology}}
		
			51
			
			,
	year={2013}
			,
	publisher={Elsevier BV}
		
	
	,
	note={s.l.}

}

@book{b75,
	
	
		,
	title={{}}
		,
	author={{
			DongLee
		} and {
			Nyung
		}}
		
		
	

}

@incollection{b76,
	
	
		,
	title={{On the rule of mixtures for flow stresses in stainless-steel-clad aluminium sandwich sheet metals}}
		,
	author={{
			YoonKim
		} and {
			Keun
		}}
		
		10.1007/bf01174685
		
	
	
		,
	booktitle={{Springer Science and Business Media LLC}}
				
			,
	year={1988}
			
		
	
	,
	note={s.l.], v. 23, n. 2}

}

@incollection{b77,
	
	
		,
	title={{Effects of weld line position and geometry on the formability of laser welded high strength low alloy and dual-phase steel blanks}}
		,
	author={{
			JLi
		} and {
			SSNayak
		} and {
			EBiro
		} and {
			SKPanda
		} and {
			FGoodwin
		} and {
			YZhou
		}}
		
		
		
		
		
	
	
		,
	journal={{Materials & Design}}
		
			52
			
			,
	year={1980-2015. 2013}
			,
	publisher={Elsevier BV}
		
	
	,
	note={s.l.}

}

@incollection{b78,
	
	
		,
	title={{Topology Optimization of an Automotive Tailor-Welded Blank Door}}
		,
	author={{
			Guangyao;Li
		} and {
			Xu
		} and {
			;Fengxiang
		} and {
			X;Huang
		} and {
			GuangyongSun
		}}
		
		
		
		
	
	
		,
	journal={{Journal Of Mechanical Design}}
		
			
			,
	year={5 mar. 2015}
			,
	publisher={ASME International}
		
	
	,
	note={s.l.], v. 137, n. 5}

}

@incollection{b79,
	
	
		,
	title={{Experimental and Numerical Investigations of Constraint Effect on Deformation Behavior of Tailor-Welded Blanks}}
		,
	author={{
			Yanhua;Li
		} and {
			JianpingLin
		}}
		
	
	
		,
	journal={{Journal of Materials Engineering and Performance}}
		
			
			,
	year={30 jun. 2015}
			,
	publisher={Springer}
		
	
	,
	note={s.l.], v. 24, n. 8}

}

@book{b80,
	
	
		,
	title={{}}
		,
	author={{
			Jun;Liu
		} and {
			Li-LiangWang
		}}
		
		
	

}

@book{b81,
	
	
		,
	title={{}}
		,
	author={{
			Lee
		} and {
			;Junyi
		} and {
			RuiliChen
		}}
		
		
		
	

}

@incollection{b82,
	
	
		,
	title={{Size-dependent mechanical properties in AA6082 tailor welded specimens}}
		,
	author={{
			El-Fakir
		} and {
			;Omer
		} and {
			Chen
		} and {
			;Li
		} and {
			Lin
		} and {
			;Jianguo
		} and {
			TrevorADean
		}}
		
		
		
		
		
		
	
	
		,
	journal={{Journal of Materials Processing Technology}}
		
			
			,
	year={2015}
			,
	publisher={Elsevier BV}
		
	
	,
	note={s.l.], v. 224}

}

@incollection{b83,
	
	
		,
	title={{A review on tailor blanks-Production, applications and evaluation}}
		,
	author={{
			Marion;Merklein
		} and {
			Maren;Johannes
		} and {
			Lechner
		} and {
			;Michael
		} and {
			AndreasKupert
		}}
		
		
		
		
	
	
		,
	journal={{Journal of Materials Processing Technology}}
		
			
			,
	year={2014}
			,
	publisher={Elsevier BV}
		
	
	,
	note={s.l.], v. 214, n. 2}

}

@book{b84,
	
	
		,
	title={{}}
		,
	author={{
			MiguelASanz
		}}
		
	

}

@book{b85,
	
	
		,
	title={{}}
		,
	author={{
			KNguyen
		}}
		
	

}

@book{b86,
	
	
		,
	title={{}}
		,
	author={{
			MarcosLatorre
		}}
		
	

}

@book{b87,
	
	
		,
	title={{}}
		,
	author={{
			ManuelRodríguez
		}}
		
	

}

@book{b88,
	
	
		,
	title={{Sheet metal forming analysis using a large strain anisotropic multiplicative plasticity formulation, based on elastic correctors, which preserves the structure of the infinitesimal theory. Finite Elements in Analysis and Design v}}
		,
	author={{
			FranciscoJMontáns
		}}
		
			,
	year={2019}
			,
	publisher={Elsevier BV}
			164
			
		
	

}

@book{b89,
	
	
		,
	title={{}}
		,
	author={{
			YasunobuMiyazak
		}}
		
	

}

@book{b90,
	
	
		,
	title={{}}
		,
	author={{
			TatsuyaSakiyama
		}}
		
	

}

@book{b91,
	
	
		,
	author={{
			ShinjiKodama
		} and {
			Steel
		}}
		
		,
	title={{Welding Techniques for Tailor Blanks. 95. ed. Japão (Tóquio): NSSM}}
				
			,
	year={2007}
			7
		
	
	,
	note={Technical Report}

}

@incollection{b92,
	
	
		,
	title={{Global-local characterization and numerical modeling of TWB laser welded joints}}
		,
	author={{
			FNalli
		} and {
			PSpena
		} and {
			;Russo
		} and {
			LCortese
		} and {
			DReiterer
		}}
		
		
		
		
	
	
		,
	journal={{International Mechanical Engineering Congress and Exposition. Flórida}}
		
			5
			
			,
	year={2017. 2017. 2017}
			,
	publisher={ASME}
		
	
	,
	note={International Mechanical Engineering Congress and Exposition -IMECE}

}

@book{b93,
	
	
		,
	title={{Analysis of weld location effect and thickness ratio on formability of tailor welded blank. Science and Technology of Welding and Joining}}
		,
	author={{
			M;Riahi
		} and {
			AAmini
		} and {
			JSabbaghzadeh
		} and {
			MJTorkamani
		}}
		
		
		
		
			,
	year={2012}
			,
	publisher={Informa UK Limited}
			
		
	
	,
	note={s.l.}

}

@book{b94,
	
	
		,
	title={{Formability of Tailor-Welded Blanks From Dual-Phase and Bake-Hardened Steels with a Planar Anisotropy Influence}}
		,
	author={{
			ASchrek
		} and {
			P?vec
		} and {
			ABrusilová
		}}
		
		
		
			,
	year={jul. 2017}
			,
	publisher={Springer}
			
			,
	address={Nature}
		
	
	,
	note={Strength Of Materials, [s.l.], v. 49, n. 4}

}

@incollection{b95,
	
	
		,
	title={{Application of Steel in Automotive Industry}}
		,
	author={{
			MayankSingh
		} and {
			Kumar
		}}
		
	
	
		,
	journal={{International Journal of Emerging Technology and Advanced Engineering}}
		
			
			,
	year={jul. 2016}
		
	
	,
	note={s.l.], v. 6, n. 7}

}

@incollection{b96,
	
	
		,
	title={{Experimental and Numerical Studies on Formability of Tailor Welded Blanks of High Strength Steel}}
		,
	author={{
			GautamVijay
		} and {
			Arvind Kumar
		}}
		
	
	
		,
	booktitle={{th International conference on Sheet Metal}}
				
			,
	publisher={Elsevier BV}
			,
	year={v.29, n.1, p472-480, feb.2019}
			18
		
	

}

@book{b97,
	
	
		,
	title={{Simulation of molten pool dynamics and stability analysis in laser buttonhole welding.10 th CIRP conference on Photonic Technologies}}
		,
	author={{
			Cho;Won-Ik
		} and {
			;Peer Woizeschke
		} and {
			Villads
		} and {
			Schultz
		}}
		
		
		
		
			,
	year={2018}
			,
	publisher={Elsevier BV}
			
		
	

}

@book{b98,
	
	
		,
	title={{}}
		,
	author={{
			YanhongUm
		}}
		
	

}

@book{b99,
	
	
		,
	title={{}}
		,
	author={{
			JingZhou
		}}
		
	

}

@book{b100,
	
	
		,
	title={{}}
		,
	author={{
			BaoyuWang
		}}
		
	

}

@book{b101,
	
	
		,
	title={{}}
		,
	author={{
			QiaolingWang
		}}
		
	

}

@book{b102,
	
	
		,
	title={{}}
		,
	author={{
			AndreaGhiotti
		}}
		
	

}

@book{b103,
	
	
		,
	title={{Numerical simulation of hot stamping by partition heating based on advanced constitutive modelling of 22MnB5 behaviour. Finite Elements in Analysis and Design}}
		,
	author={{
			StefaniaBruschi
		}}
		
			,
	year={2018}
			,
	publisher={Elsevier BV}
			
		
	

}

@incollection{b104,
	
	
		,
	title={{Mechanical properties and microstructure of friction stir welded tailor-made blanks}}
		,
	author={{
			AmirZadpoor
		} and {
			;Abbas
		} and {
			;Sinke; Jos
		} and {
			Benedictus
		} and {
			;Rinze
		} and {
			RaphPieters
		}}
		
		
		
		
		
	
	
		,
	journal={{Materials Science And Engineering: A}}
		
			
			,
	year={2008}
			,
	publisher={Elsevier BV}
		
	
	,
	note={s.l.], v. 494, n. 1-2}

}

@book{b105,
	
	
		,
	title={{Finite element analysis of tailor-welded blanks. Finite Elements in Analysis and Design}}
		,
	author={{
			KZhao
		} and {
			BChun
		} and {
			JKLee
		}}
		
		
		
			,
	year={2001}
			,
	publisher={Elsevier BV}
			
		
	
	,
	note={s.l.], v. 37, n. 2}

}

@book{b106,
	
	
		,
	title={{}}
		,
	author={{
			GDHuynh
		}}
		
	

}

@book{b107,
	
	
		,
	title={{}}
		,
	author={{
			XZhuang
		}}
		
	

}

@book{b108,
	
	
		,
	title={{Elasto-plastic large deformation analysis of multi-patch thin shells by is geometric approach. Finite Elements in Analysis and Design}}
		,
	author={{
			HGBui; G. Meschke
		} and {
			; HNguyen-Xuan
		}}
		
		10.1016/j.finel.2020.103389
		fev. 2020
		
		
			,
	publisher={Elsevier BV}
			
		
	
	,
	note={s.l.], v. 3, n. 2}

}