# INTRODUCTION ecently, interconnect circuit attract increasing attracting in a wide area of scientist researchers such as circuit theory design, microwave application, integrated circuit and physical model. The circuit networks analysis and design have been addressed by many research's regarding several architectures with finite or infinite size [1][2][3][4]. Many competitive methods have been developed to improving the design and modelling of the several lattice. Among them we cited, the Green function lattice [5], the Laplacian matrix [6] and the Recursion Transform method [7]. However, despite the accuracy and efficiency of these methods, there are limited to the analysis of the equivalent resistance or impedance for homogenous circuits excited an exterior source. Latterly, a new approach of the Wave Concept Iterative Process method (WCIP) [8] is for computing the effective impedance and the current distribution of an RLC electrical circuit with triangular or hexagonal lattice. accurately model continuous mediums if the cell's length is much smaller than the lattice. The main keys of the proposed method was summarised as follows: (1) the incoming and outgoing wave's concept definition from the electrical entities (voltage and current). (2) The introduction of the auxiliary sources techniques instead of the circuit components. (3) the use of the Fourier transforms appropriate to hexagonal and triangular lattice named HFFT (hexagonal fast Fourier Transform) and the resolution of the alternative (spectral-spatial) equations by an iterative process. Therefore, the mathematical formulation is developed into two definition domains; a spectraldomain in which periodicity and coupling between components of the circuit was defined and a spatial one describing the topology and values of network elements, and imposing the continuities conditions (Kirchhoff's laws). The above relations represent a recursive system, which is resolved by an iterative process; the transition between one domain to another is guaranteed by the HFFT and its inverse. In the first part of this paper, we develop the mathematical formalism describing the new WCIP method approach. In the second part, we show the design of the proposed circuit results, such as the spatial variation of the electric field inside the resonator and the frequency response of the transmission coefficient. # II. # THEORETICAL FORMULATION a) Waves definition The WCIP principle is described in many papers; it is founded on the introduction of the incident (A) and reflected (B) waves tangential to each edge of the network. These waves are defined from the voltage and the current by the following equation: ( ) ( ) ? ? ? ? ? ? ? ? = + = I Z V Z B I Z V Z A 0 0 0 0 1 1 (1) Where, 0 Z is an arbitrary chosen impedance. The WCIP method is successfully used, near two decades, in the analysis of planar micro strip microwave circuits [9], [10] and it is demonstrating its power for solving the radiation and scattering electromagnetic problems [11][12][13]. The method is also reformulated to analyze quasi-periodic lumped circuits with rectangular grid [14].These periodic lumped circuits can be considered as good equivalent representations to The electric current (I) and the voltage (V) can be calculated as follows ( 6): ( ) ( ) ? ? ? ? ? ? = + = B A Z I B A Z V 0 0 1 (2) # b) Spectral-domain analysis This domain characterizes the physical relations (periodicity and Kirchhoff laws) established between the electrical components and written in waves term. Fig. 1 shows an electrical circuit network, the electrical schema considers a capacitor connected to a resistor and distributed according to an equilateral triangular grid. The circuit is excited by a lumped source located in the center (n=0, m=0) at a vertical edge. # With The unit cell of the studied network is represented by the Fig. 2; it considers three horizontal branches connected to a vertical one at the nodes. The The subscript (*) denote the conjugate of a complex number. ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ? ? ? ? ? ? ? ? ? ? ? ? ? ? Î?" = ? ? ? ? ? ? ? ? ? ? ? ? ? ? m n A m n A m n A m n A m n B m n B m n B m n B # c) Spatial domain analysis In the spatial domain, every auxiliary source replace by its corresponding impedance (capacitor, inductor or resistor), then the spatial reflexion operator is given by 1 0 0 ) )( ( ? + ? = Z Z Z Z S (8) For the open and shorted circuit, the spatial reflexion operator is given by ? ? ?? = circuit open the For circuit short the For S 1 1 (9) In considering the excitation source, the reflected waves are related to the incidents ones by the following relationship 0 A SB A + = (10) With 0 A represents the feeding source in wave term. # d) Iterative process Collecting ( 7) and ( 10), the iterative process is governed by a set of two equations describing, the boundaries condition (Kirchhoff's laws) in the spatialdomain and the periodicity laws in the spectral-domain. The Hexagonal Fast Fourier Transform (HFFT) and its inverse (HFFT) -1 , ensure the transition between the two domains (Fig. 3) [8]. Electrical quantities: current and # NUMERICAL RESULTS The above formulation is employed for calculated the electrical current components on the horizontal edges of the lattice and the potential difference between the nodes and ground in a first step, then the method is also used to investigating the socalled perturbed lattice. In the numerical example, the total cells number are fixed to N= 100 and M=116, and we take C=2.3pF and R=0.4 ?. The circuit is excited by a voltage source E 0 = 1V, the source is located at the middle of the circuit in (N =0, M =0). 5 shows the vertical voltage propagation; we note that the dispersion is considerable in the proximity of the feeding source. # Fig. 5: Vertical voltage repartition In the next, we analysis the so called perturbed lattice. A perturbed lattice is defined, in many types of research that interested in computing the equivalent resistance or impedance between two arbitrary nodes, by the network wherein we remove one or two bonds from the regular circuit. Herein, we extend this description and we define a perturbed architecture by the lattice that we remove one or many arbitrary part. 9) and (10) demonstrates that the propagation becomes more degenerate when the surfaces and number of the removed bans increases. It is worth noting that the problems of the electrical perturbed circuits become more interesting for several physical difficulties analysis, notably for in the modelling of semiconductors with electrical default. IV. # CONCLUSION In this paper, a full-wave concept was formulated to investigate an RC circuit with triangular lattice. The method is defined in two definition domains: a spectral-domain describing the periodicity laws and a spatial-domain in the design of the circuit is defined and the Kirchhoff's laws are imposed. The auxiliary sources was introduced for characterizing the potential difference across each electrical element. In numerical results, the electrical current and vertical potential difference distribution are visualized for a planar capacitor-resistor circuit with triangular architecture. The perturbed RC circuit is also defined and investigated, we observe a deformation of the electrical current and voltage. 1![Fig. 1: A capacitor triangular circuit lattice The potential difference across each lumped components of the circuits (capacitor, open circuit, shorted circuit and, source) is represented by an auxiliary sources.](image-2.png "Fig. 1 :") 2![Fig. 2: Triangular unit cell From Fig. 2, the periodicity laws permit to write](image-3.png "Fig. 2 :") 3![Fig. 3: Principle of the iterative scheme III.](image-4.png "Fig. 3 :") 44![Fig. 4: Electric currents components distribution](image-5.png "Fig. 4 Fig. 4 :") 67![Fig. 6: Example of perturbed circuit with triangular lattice](image-6.png "Fig. 6 :FFig. 7 :") 8910![Fig. 8: Vertical electric voltage distribution for a perturbed triangular lattice We clearly observe the perturbation effecton the graph, infact, the currents and voltage are null in the removed bands and in the irproximities.In the next example, we remove two electrical bands for a wide eliminated area. The suppressed surfaces are situated on (1?n?20), (1?m?20 ) and ( -20?n?-1),(-20?m?-1).](image-7.png "Fig. 8 :Fig. 9 :Fig. 10 :") © 2019 Global Journals Electric Current and Voltage Behaviour for a Perturbed Capacitor Lattice with Planar Triangular Design * Dual composite right/left-HANDED (D-CRLH) transmission line metamaterial CChristophe IEEE Microw and Wirl. Comp. LETT 12 2006 * Topological properties of linear circuit lattices VAVictor IGLeonid JLiang Phys Rev Lett 114 173902 2015 * Partitioning-based realizable model-order reduction method for RLC circuits PMiettinen MHonkala JRoos MValtonen IEEE Trans Compt-Aid Des of Integ C and Syst 30 2001 * On the resistance between two points on a grid Giulio Am J Phys 62 1994 * Interstitial single resistor in a network of resistors application of the lattice Green's function MOwaidat RSHijjawi JMKhalifeh Phy A-Math Theor 2010 37 * Theory of impedance networks: the two-point impedance and LC resonances WJTzeng FYWu J Phys A: Math Gen 39 2006 * Recursion-transform method for computing resistance of the complex resistor network with three arbitrary boundaries ZZTan Phys Rev E 91 2015 * The wave concept iterative process (WCIP) method for electrical circuit network with triangular and hexagonal topology NAmmar HBaudrand Int J Circ Theor Appl 47 2019 * Application of wave concept iterative procedure in planar circuit RS NGongo HBaudrand Recent Res. Devel. Microw. Theory Techn 1 1999 * A new fullwave hybrid differential-integral approach for the investigation of multilayer structures including non uniformlydoped diffusions SWane DBajon HBaudrand IEEE Tran on Micr Theo and Tech 53 2005 * Wave Concept Iterative Process method for Electromagnetic or Photonic Jets: .and Experimental Results NAmmar TAguili HBaudrand BSauviac BOuannas IEEE Trans Ant. Propag 63 2015 * WCIP method for multiple-loop antennas around a spherical media NAmmar HBaudrand IET Microw., Ant. & Propa 13 2019 * Global Journal of Researches in Engineering * Analysis of multilayered cylindrical structures using a full wave method NAmmar TAguili HBaudrand Prog. Electromag. Res 58 2008 * Characterization of the composite right/left-handed transmission line metamaterial circuits using iterative method WCIP TElbellili AKarim LLatrach THichem HBaudrand Int. J. of Micr. And Wirl. Tech 9