Nonlinear Analysis of Edge Joint on T-shaped Concrete-filled Steel Tubular Column-H-shaped Steel Beam Seismic Performance based on ABAQUS
Keywords:
t-shaped concrete-filled steel tubular column; H-shaped steel beam; Seismic performance of joint; finite element analysis
Abstract
To comprehensively analyze the seismic performance and failure modes of edge joint, which is composed of T-shaped concrete-filled steel tubular column and H-shaped steel beam, the joint was imposed through low frequency cycling loading. Model of edge joint was established by the nonlinear finite element software ABAQUS. The effect of different parameters, such as axial compression ratio and side plate extension length, on the seismic performance were simulated. The results indicates that the buckling of the steel beam occurs at the lateral extension of the side plate due to the strengthening of the side plate; the axial compression ratio has no obvious effect on the ultimate load; the increase of the side plate length can effectively improve the ultimate load.
Downloads
- Article PDF
- TEI XML Kaleidoscope (download in zip)* (Beta by AI)
- Lens* NISO JATS XML (Beta by AI)
- HTML Kaleidoscope* (Beta by AI)
- DBK XML Kaleidoscope (download in zip)* (Beta by AI)
- LaTeX pdf Kaleidoscope* (Beta by AI)
- EPUB Kaleidoscope* (Beta by AI)
- MD Kaleidoscope* (Beta by AI)
- FO Kaleidoscope* (Beta by AI)
- BIB Kaleidoscope* (Beta by AI)
- LaTeX Kaleidoscope* (Beta by AI)
How to Cite
Published
2019-01-15
Issue
Section
License
Copyright (c) 2019 Authors and Global Journals Private Limited
This work is licensed under a Creative Commons Attribution 4.0 International License.