CPW Fed Rectangular Microstrip Patch Antenna with Upper Pentagonal End Cut

Authors

  • Prof. Dr. R. K Khola

  • Paresh Jain

Keywords:

microstrip antenna, cpw fed, hfss 130, 24 ghz and fr-4 epoxy

Abstract

rectangular microstrip patch antenna at resonant frequency of 2.4 GHz. These types of microstrip antennas give high performance, robust in design and easy to fabricate. Patch elements are placed on FR-4 epoxy substrate of relative permittivity 4.4 kept at a substrate height of 1.6 mm. Simulation results are presented using HFSS version 13.0. The return loss obtained is - 22.1__, and the impedance bandwidth achieved is 37%, VSWR is 1.15 and the gain is 2.55__ at the centre frequency of 2.4 GHz.

Downloads

How to Cite

Prof. Dr. R. K Khola, & Paresh Jain. (2016). CPW Fed Rectangular Microstrip Patch Antenna with Upper Pentagonal End Cut. Global Journals of Research in Engineering, 16(F2), 1–3. Retrieved from https://engineeringresearch.org/index.php/GJRE/article/view/1408

 
CPW Fed Rectangular Microstrip Patch Antenna with Upper Pentagonal End Cut

Published

2016-01-15

Issue

Vol. 16 No. F2 (2016): GJRE-F Electrical and Electronic: Volume 16 Issue F2

Section

Articles

License

Copyright (c) 2016 Authors and Global Journals Private Limited

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.