@incollection{,
	
					
					
					696D00E8D08E4BF7346EA3FCA05840DE
				,
	author={{Perla SreenivasaRao} and {Dr. KRavindra} and {SV University, Meerut, UP, India}},
	journal={{Global Journal of Researches in Engineering}},
	journal={{GJRE}}2249-45960975-586110.34257/gjre,
	address={Cambridge, United States},
	publisher={Global Journals Organisation}1511721
}

@incollection{b0,
	
	
		,
	title={{Evaluation of Optimal Parameters for machining with Wire-cut EDM Using Grey-Taguchi Method}}
		,
	author={{
			MM MS V Subrahmanyam
		} and {
			Sarcar
		}}
		
	
	
		,
	journal={{International Journal of Scientific and Research Publications}}
		2250-3153
		
			3
			3
			,
	year={March 2013}
		
	

}

@incollection{b1,
	
	
		,
	title={{On the influence of cutting speed limitation on the accuracy of wire-EDM corner-cutting}}
		,
	author={{
			JASanchez
		} and {
			JLRodil
		} and {
			AHerrero
		} and {
			LNLopez De Lacalle
		} and {
			ALamikiz
		}}
		
		
		
		
	
	
		,
	journal={{Journal of material processing technology}}
		
			182
			
			,
	year={2007}
			,
	publisher={Elsevier}
		
	

}

@incollection{b2,
	
	
		,
	title={{Parametric analysis for machining HSS by WEDM-development of Mathematical Correlations and statistical analysis}}
		,
	author={{
			SSivanaga Malleswara Rao
		} and {
			ChV SParameswara Rao
		}}
		
	
	
		,
	journal={{IJ-ETA-ETS}}
		
			
			,
	year={Feb 2013}
		
	

}

@incollection{b3,
	
	
		,
	title={{Parametric Evaluation for Machining Die-Steel with WEDM}}
		,
	author={{
			SSivanaga Malleswara Rao
		} and {
			ChV SParameswara Rao
		}}
		
	
	
		,
	journal={{International Journal of Scientific and Research Publications}}
		2250-3153
		
			3
			4
			
			,
	year={April 2013}
		
	

}

@incollection{b4,
	
	
		,
	title={{Evaluation of Optimal Parameters for machining Brass with Wire-cut EDM}}
		,
	author={{
			V SCh
		} and {
			MmmParameswara Rao
		} and {
			Sarcar
		}}
		
		
	
	
		,
	journal={{Journal of Scientific and Industrial Research}}
		0022-4456
		
			68
			1
			
			,
	year={Jan-2009}
		
	

}

@incollection{b5,
	
	
		,
	title={{EDM machinability and frictional behavior of ZrO2-WC composites}}
	
	
		,
	journal={{International Journal of Advances Manufacturing Technology}}
		
			41
			
			,
	publisher={Springer}
		
	

}

@incollection{b6,
	
	
		,
	title={{An investigation into the machining characteristics of Nimonic 80A using CNC WIRE-EDM}}
		,
	author={{
			GoswamiAmitesh
		} and {
			KumarJatinder
		}}
		
	
	
		,
	journal={{International Journal of Advanced Engineering Technology}}
		0976-3945 IJAET
		
			
			,
	year={January-March, 2012}
		
	

}

@incollection{b7,
	
	
		,
	title={{Workpiece surface roughness and integrity after WEDM of Ti-6Al-4V and Inconel 718 using minimum damage generator technology}}
		,
	author={{
			DKAspinwall
		} and {
			SLSoo
		} and {
			AEBerrisford
		} and {
			GWalder
		}}
		
		
		
	
	
		,
	journal={{CIRP Annals-Manufacturing Technology}}
		
			57
			
			,
	year={2008}
			,
	publisher={Elsevier}
		
	

}

@incollection{b8,
	
	
		,
	title={{Optimizing the machining characteristics of Nimonic 80A using wire-cut EDM}}
		,
	author={{
			MarinaKousoulidou
		} and {
			AthanasiosDimaratos
		}}
		
	
	
		,
	journal={{Rev. Téc. Ing. Univ. Zulia}}
		
			37
			
			,
	year={2014}
		
	

}

@book{b9,
	
	
		,
	author={{
			PRao
		} and {
			DrChvs Parameshwara Rao
		} and {
			DrKRavindra
		}}
		
		
		,
	title={{Experimental studies on parametric influence on machining of Titanium with WEDM}}
				
			,
	year={May-2014}
			2
			
		
	
	,
	note={IJETR edition}

}

@incollection{b10,
	
	
		,
	title={{Digraph and matrix method to evaluate the machinability of tungsten carbide composite with wire EDM}}
		10.1007/s00170-011-3234-5
	
	
		,
	journal={{Int J Adv Manuf Technol}}
		,
	editor={Kamal Jangra & Sandeep Grover & Felix T. S. Chan & Aman Aggarwal.}
		
			,
	year={February 2011}
			,
	publisher={Springer-Verlag London Limited}
		
	

}

@incollection{b11,
	
	
		,
	title={{WEDM Machinability Comparison of Different steel grades}}
		,
	author={{
			MaggiG N FLevy
		}}
	
	
		,
	journal={{Annals of CIRP}}
		
			,
	year={January 1990}
		
	

}