@incollection{,
	
					
					
					47AF7A50C472450A44806ED8783F4811
				,
	author={{Hélio LuizSimonetti} and {Valério S.Almeida} and {Virgil Del DucaAlmeida} and {Luttgardes de OliveiraNeto} and {Marlan D. S.Cutrim} and {Vitor Manuel A.Leitão}},
	journal={{Global Journal of Researches in Engineering}},
	journal={{GJRE}}2249-45960975-586110.34257/gjre,
	address={Cambridge, United States},
	publisher={Global Journals Organisation}2322341
}

@incollection{b0,
	
	
		,
	title={{Toward a consistent design of structural concrete}}
		,
	author={{
			JSchlaich
		} and {
			KSchafer
		} and {
			MJennewein
		}}
		
		
	
	
		,
	journal={{PCI-Journal}}
		
			32
			3
			
			,
	year={May/June, 1987}
		
	

}

@incollection{b1,
	
	
		,
	title={{Design and detailing of structural concrete using strut-and-tie models}}
		,
	author={{
			JSchlaich
		} and {
			KSchäfer
		}}
		
	
	
		,
	journal={{Struct Eng}}
		
			69
			6
			
			,
	year={1991}
		
	

}

@incollection{b2,
	
	
		,
	title={{Stress fields for nodes of strut-and-tie models}}
		,
	author={{
			MSchlaich
		} and {
			GAnagnostou
		}}
		
	
	
		,
	journal={{Struct Eng}}
		
			116
			1
			
			,
	year={1990}
		
	

}

@book{b3,
	
	
		,
	title={{On plastic analysis of reinforced concrete. Institute of Structural Engineers}}
		,
	author={{
			PMarti
		}}
		
			,
	year={1980}
			104
		
	

}

@incollection{b4,
	
	
		,
	title={{Truss models in detailing}}
		,
	author={{
			PMarti
		}}
	
	
		,
	journal={{Concr. Int}}
		
			7
			12
			
			,
	year={1985}
		
	

}

@book{b5,
	
	
		,
	title={{Design of Concrete Structures with Stress Fields, 1st ed}}
		,
	author={{
			AMuttoni
		} and {
			JSchwartz
		} and {
			BThürlimann
		}}
		
		
		
			,
	year={1996}
			,
	publisher={Birkhäuser Verlag}
			,
	address={Basel}
		
	

}

@incollection{b6,
	
	
		,
	title={{Strength of Reinforced Concrete Pier Caps-Experimental Validation of Strut-and-Tie Method}}
		,
	author={{
			InduGeevar
		} and {
			; DevdasMenon
		}}
		
	
	
		,
	journal={{ACI Structural Journal}}
		
			116
			1
			
			,
	year={2019}
		
	

}

@incollection{b7,
	
	
		,
	title={{Evaluation of existing strut-And-tie methods and recommended improvements}}
		,
	author={{
			RobinGTuchscherer
		} and {
			DavidBBirrcher
		} and {
			ChristopherSWilliams
		} and {
			DeanJDeschenes
		} and {
			OguzhanBayrak
		}}
		
		
		
		
	
	
		,
	journal={{ACI structural journal}}
		
			111
			6
			
			,
	year={2014}
		
	

}

@incollection{b8,
	
	
		,
	title={{Evaluation of Strut-and-Tie Modeling Applied to Dapped Beam with Opening}}
		,
	author={{
			BSChen
		} and {
			MJHagenberger
		} and {
			JEBreen
		}}
		
		
	
	
		,
	journal={{ACI Structural Journal}}
		
			99
			
			,
	year={2002}
		
	

}

@incollection{b9,
	
	
		,
	title={{Experimental Evaluation of Strut-and-Tie Model Applied to Deep Beam with Opening}}
		,
	author={{
			BSMaxwell
		} and {
			JEBreen
		}}
		
	
	
		,
	journal={{ACI Structural Journal}}
		
			97
			
			,
	year={2000}
		
	

}

@incollection{b10,
	
	
		,
	title={{Recent Approaches to Shear Design of Structural Concrete}}
		ASCE-ACI Committee 445
	
	
		,
	journal={{Journal of Structural Engineering}}
		
			124
			12
			
			,
	year={Dec. 1998}
		
	

}

@book{b11,
	
	
		,
	title={{AASHTO LRFD Bridge Design Specifications; American Association of State Highway and Transportation Officials}}
		
			,
	year={2007}
			,
	publisher={American Association of State Highway and Transportation Officials}
			,
	address={Washington, DC, USA}
		
	

}

@book{b12,
	
	
		,
	title={{Deutsche Norm, Concrete, Reinforced and Prestressed Concrete Structures-Part 1:3 Design and Construction, Corrigenda to DIN}}
		1045-1:2001- 07
		
	

}

@book{b13,
	
	
		,
	title={{Design of Concrete Structures for Buildings}}
		
			,
	year={1984}
			,
	publisher={Canadian Standards Association (CSA)}
			CSA
			,
	address={Toronto, ON, Canada}
		
	
	,
	note={CAN3-A23.3-M84}

}

@incollection{b14,
	
	
		,
	title={{Optimization-based three-dimensional strut-and-tie model generation for reinforced concrete}}
		,
	author={{
			YiXia
		} and {
			;Matthijs Langelaar
		} and {
			;Max
		} and {
			ANHendriks
		}}
		
		
		
	
	
		,
	journal={{Computer-Aided Civil and Infrastructure Engineering}}
		
			36
			
			,
	year={2021}
		
	

}

@incollection{b15,
	
	
		,
	title={{Generating strut-and-tie patterns for reinforced concrete structures using topology optimization}}
		,
	author={{
			MBruggi
		}}
	
	
		,
	journal={{Computers and Structures}}
		
			87
			
			,
	year={2009}
		
	

}

@incollection{b16,
	
	
		,
	title={{Conceptual design of reinforced concrete structures using topology V. Conclusions © 2023 Global Journ als optimization with elastoplastic material modeling}}
		,
	author={{
			MBogomolny
		} and {
			OAmir
		}}
		
	
	
		,
	journal={{Int. J. Numer. Meth. Engng}}
		
			90
			
			,
	year={2012}
		
	

}

@incollection{b17,
	
	
		,
	title={{Automatic Generation of Proper Strut-and-Tie Model}}
		,
	author={{
			SebastianFVaquero
		} and {
			RaulDBertero
		}}
		
	
	
		,
	journal={{ACI Structural Journal}}
		
			117
			6
			81
			,
	year={Nov. 2020}
		
	

}

@incollection{b18,
	
	
		,
	title={{Automatic Generation of Truss Model for Optimal Design of Reinforced Concrete Structures}}
		,
	author={{
			MAAli
		} and {
			RNWhite
		}}
		
	
	
		,
	journal={{ACI Structural Journal}}
		
			98
			4
			
			,
	year={July-Aug. 2001}
		
	

}

@incollection{b19,
	
	
		,
	title={{Determination of strut-and-tie models using evolutionary structural optimization}}
		,
	author={{
			HGKwak
		} and {
			SHNoh
		}}
		
	
	
		,
	journal={{Engineering Structures}}
		
			28
			10
			
			,
	year={2006}
		
	

}

@incollection{b20,
	
	
		,
	title={{Topology Optimization of Strut-and-Tie Models in Reinforced Concrete Structures Using an Evolutionary Procedure}}
		,
	author={{
			QQLiang
		} and {
			YMXie
		} and {
			GPSteven
		}}
		
		
	
	
		,
	journal={{ACI Structural Journal}}
		
			97
			2
			
			,
	year={2000}
		
	

}

@incollection{b21,
	
	
		,
	title={{Generating Optimal Strut-and-Tie Models in Prestressed Concrete Beams by Performance-Based Optimization}}
		,
	author={{
			QQLiang
		} and {
			YMXie
		} and {
			GPSteven
		}}
		
		
	
	
		,
	journal={{ACI Structural Journal}}
		
			98
			2
			
			,
	year={2001}
		
	

}

@incollection{b22,
	
	
		,
	title={{Performance-Based Optimization for Strut-Tie Modeling of Structural Concrete}}
		,
	author={{
			QQLiang
		} and {
			BUy
		} and {
			GPSteven
		}}
		
		
	
	
		,
	journal={{Journal of Structural Engineering}}
		
			128
			5
			
			,
	year={2002}
		
	

}

@incollection{b23,
	
	
		,
	title={{Evaluation of strut-and-tie model applied to deep beam with opening}}
		,
	author={{
			BSChen
		} and {
			MJHagenberger
		} and {
			JEBreen
		}}
		
		
	
	
		,
	journal={{ACI Structural Journal}}
		
			99
			2
			
			,
	year={2002}
		
	

}

@incollection{b24,
	
	
		,
	title={{A new evaluation procedure for the strut-and-tie models of the disturbed regions of reinforced concrete structures}}
		,
	author={{
			JTZhong
		} and {
			LWang
		} and {
			PDeng
		} and {
			MZhou
		}}
		
		
		
	
	
		,
	journal={{Engineering Structures}}
		
			148
			
			,
	year={2017}
		
	

}

@incollection{b25,
	
	
		,
	title={{Bi-directional evolutionary structural optimization for strut-and-tie modelling of three-dimensional structural concrete}}
		,
	author={{
			VShobeiri
		} and {
			BAhmadi-Nedushan
		}}
		
	
	
		,
	journal={{Engineering Optimization}}
		
			49
			12
			
			,
	year={2017}
		
	

}

@incollection{b26,
	
	
		,
	title={{Strut-and-tie design methodology for threedimensional reinforced concrete structures}}
		,
	author={{
			LJLeu
		} and {
			CWHuang
		} and {
			CSChen
		} and {
			YPLiao
		}}
		
		
		
	
	
		,
	journal={{Journal of structural Engineering}}
		
			132
			6
			929
			,
	year={2006}
			,
	address={New York}
		
	

}

@incollection{b27,
	
	
		,
	title={{Comparative analysis of strut-and-tie models using Smooth Evolutionary Structural Optimization}}
		,
	author={{
			VSAlmeida
		} and {
			HLSimonetti
		} and {
			LONeto
		}}
		
		
	
	
		,
	journal={{Engineering Structures}}
		
			56
			
			,
	year={2013}
		
	

}

@incollection{b28,
	
	
		,
	title={{Structural boundary design via level set and immersed interface methods}}
		,
	author={{
			JASethian
		} and {
			AWiegmann
		}}
		
		10.1006/jcph.2000.6581
		
	
	
		,
	journal={{Journal of Computational Physics}}
		
			163
			
			,
	year={2000}
		
	

}

@incollection{b29,
	
	
		,
	title={{A level set method for structural topology optimization}}
		,
	author={{
			MYWang
		} and {
			XWang
		} and {
			DGuo
		}}
		
		
	
	
		,
	journal={{Comput Methods Appl Mech Eng}}
		
			192
			
			,
	year={2003}
		
	

}

@incollection{b30,
	
	
		,
	title={{Structural optimization using sensitivity analysis and a level-set method}}
		,
	author={{
			GAllaire
		} and {
			FJouve
		} and {
			AMToader
		}}
		
		
	
	
		,
	journal={{J Comput Phys}}
		
			194
			1
			
			,
	year={2004}
		
	

}

@incollection{b31,
	
	
		,
	title={{A level set method for structural shape and topology optimization using radial basis functions}}
		,
	author={{
			ZLuo
		} and {
			LTong
		} and {
			ZKang
		}}
		
		
	
	
		,
	journal={{Comput Struct}}
		
			87
			
			,
	year={2009}
		
	

}

@incollection{b32,
	
	
		,
	title={{Level-set methods for structural topology optimization: a review}}
		,
	author={{
			NPVan Dijk
		} and {
			KMaute
		} and {
			MLangelaar
		} and {
			FVan Keulen
		}}
		
		
		
	
	
		,
	journal={{Struct Multidiscip Optim}}
		
			48
			
			,
	year={2013}
		
	

}

@book{b33,
	
	
		,
	title={{MATLAB implementations of velocity field level set method for topology optimization: an 80-line code for 2D and a 100-line code for 3D problems. Structural and Multidisciplinary Optimization}}
		,
	author={{
			YWang
		} and {
			ZKang
		}}
		
		
			,
	year={2021}
			64
			
		
	

}

@incollection{b34,
	
	
		,
	title={{Velocity field level-set method for topological shape optimization using freely distributed design variables}}
		,
	author={{
			YWang
		} and {
			ZKang
		} and {
			PLiu
		}}
		
		
	
	
		,
	journal={{Int J Numer Methods Eng}}
		
			120
			
			,
	year={2019}
		
	

}

@incollection{b35,
	
	
		,
	title={{Evolutionary topological optimization of vibrating continuum structures for natural frequencies}}
		,
	author={{
			XHuang
		} and {
			ZHZuo
		} and {
			YMXie
		}}
		
		
	
	
		,
	journal={{Computer Structure}}
		
			88
			5-6
			
			,
	year={2010}
		
	

}

@incollection{b36,
	
	
		,
	title={{Topology optimization of structures with manufacturing and unilateral contact constraints by minimizing an adjustable compliance-volume product}}
		,
	author={{
			NStrömberg
		}}
	
	
		,
	journal={{Struct Multidiscip Optim}}
		
			42
			3
			
			,
	year={2010}
		
	

}

@incollection{b37,
	
	
		,
	title={{A level set based topology optimization method using the discretized signed distance function as the design variables}}
		,
	author={{
			SYamasaki
		} and {
			TNomura
		} and {
			AKawamoto
		} and {
			KSato
		} and {
			KIzui
		} and {
			SNishiwaki
		}}
		
		
		
		
		
	
	
		,
	journal={{Struct Multidisc Optim}}
		
			41
			5
			
			,
	year={2009}
		
	

}

@incollection{b38,
	
	
		,
	title={{Structural optimization by the level-set method}}
		,
	author={{
			GAllaire
		} and {
			FJouve
		} and {
			A-MToader
		}}
		
		
	
	
		,
	booktitle={{Free boundary problems}}
		,
	editor={
			PColli
		 and 
			CVerdi
		 and 
			AVisintin
		}
		
		
		
			,
	publisher={Birkhäuser Basel}
			,
	year={2003}
			
		
	

}

@incollection{b39,
	
	
		,
	title={{Coupled aerostructural topology optimization using a level set method for 3D aircraft wings}}
		,
	author={{
			PDDunning
		} and {
			BKStanford
		} and {
			HAKim
		}}
		
		
	
	
		,
	journal={{Struct Multidiscip Optim}}
		
			51
			5
			
			,
	year={2014}
		
	

}

@incollection{b40,
	
	
		,
	title={{Hierarchical topology optimization addressing material design constraints and application to sandwich-type structures}}
		,
	author={{
			PGCoelho
		} and {
			HCRodrigues
		}}
		
	
	
		,
	journal={{Struct Multidiscip Optim}}
		
			52
			1
			
			,
	year={2015}
		
	

}

@incollection{b41,
	
	
		,
	title={{A simple evolutionary procedure for structural optimization}}
		,
	author={{
			YMXie
		} and {
			GPSteven
		}}
		
	
	
		,
	journal={{Computers & Structures}}
		
			49
			5
			
			,
	year={1993}
		
	

}

@incollection{b42,
	
	
		,
	title={{A smooth evolutionary structural optimization procedure applied to plane stress problem}}
		,
	author={{
			HLSimonetti
		} and {
			VSAlmeida
		} and {
			LONeto
		}}
		
		
	
	
		,
	journal={{Eng Struct}}
		
			75
			
			,
	year={2014}
		
	

}

@book{b43,
	
	
		,
	title={{Generation of strut-and-tie models by topology design using}}
		,
	author={{
			MVictoria
		} and {
			OMQuerin
		} and {
			PMartí
		}}
		
		
		
	

}

@incollection{b44,
	
	
		,
	title={{Method of moving asymptotes -a new method for structural optimization}}
		,
	author={{
			KSvanberg
		}}
	
	
		,
	journal={{Int. J. Num. Meth. Eng}}
		
			24
			
			,
	year={1987}
		
	

}

@incollection{b45,
	
	
		,
	title={{different material properties in tension and compression}}
		10.1007/s00158-011-0633-z
		
	
	
		,
	journal={{Struct Multidisc Optim}}
		
			44
			
			,
	year={2011}
		
	

}

@incollection{b46,
	
	
		,
	title={{Structural idealization for deep beams with web openings}}
		,
	author={{
			FKKong
		} and {
			GRSharp
		}}
		
	
	
		,
	journal={{Magazine Concrete Res}}
		
			29
			
			,
	year={1977}
		
	

}

@incollection{b47,
	
	
		,
	title={{Reliability-Based Topology Optimization: An Extension of the SESO and SERA Methods for Three-Dimensional Structures}}
		,
	author={{
			HLSimonetti
		} and {
			VSAlmeida
		} and {
			FDe Assis Das Neves
		} and {
			VDel Duca Almeida
		} and {
			LDe Oliveira Neto
		}}
		
		
		
		
		10.3390/app12094220.©2023GlobalJournals
		
	
	
		,
	journal={{Appl. Sci. 2022}}
		
			12
			4220
		
	

}