# I. Introduction a) Causes of Pavement Deformation in Highway Pavement eformation of highway pavement can be occasioned by weak soils [1][2], frost action [3][4], expansive soils [5], Unbound aggregate material [6], seasonal drying and wetting [7]. Deformation can also result from thermal stresses [8], differential subgrade settlement [10], and aggregate morphology [11][12]. # b) Methods of Analysis of Highway Pavement Boussinesq's work was foundational for the development of all subsequent elasticity theories. Boussinesq's theory assumed one layer of uniform and homogenous subgrade material. According to [13], the stresses applied to an elastic homogenous and isotropic material extended to infinity at both directions, (horizontal and vertical) and the stress developed at any depth, z, below the surface of the pavement under the influence of a point load in Figure 1 can be calculated thus: Vertical stress, ? ?? = 3?? 2?? . ?? 3 ?? 5 (1) After the pioneering work of Boussinesq, different methods of analysis have been used in obtaining stresses and the accompanying deformation in highway pavement. Behera (2013) [14] used linear elastic theory in analyzing the deformation behaviour of fly ash composite material in the subbase of surface coal mine haul road. Uzan (2004) [15] applied the mechanistic framework in determining the permanent deformation of flexible pavement. Du and Dai (2006) [16] utilized the dynamic stability evaluation index in analyzing permanent deformation. It was discovered that the method is not fit for evaluating permanent deformation of asphalt mixture. Tchemou et al. 2011 [17] and Qiao et al. 2015 [18] applied rutting mechanisms in predicting flexible pavement degradation, [19] used model simulation in determining permanent deformation in high-modulus asphalt having sloped and horizontally curved alignment. Du and Shen (2005) [20] applied grey modelling method, [21] used field cores, and [22] used ground-penetrating-ladar in predicting the development of irrecoverable deformation in road pavement. Sawant (2009) [23] used dynamic analysis whereas [24] used the back-calculation of the transition probability approach. Each group of researchers demonstrated the merit of their method. Many researchers have applied finite element method (FEM) in the analysis of deformation in highway pavement [25][26][27][28]. He et al. (2008) [29] used 3D viscoelastic finite element analysis (FEA) in determining asphalt pavement rutting deformation. Kim et. al. (2014) [30] used FEM in modelling the effect of environmental factors on rigid pavement deformation. In analyzing the influence of asphalt deformation under heterogeneous settlement of roadbed whereas [31] used elastic-plastic dynamic FEM to compute the differential settlement of the half-filled and half dug embankment under axle load. The latter succeeded in deriving a model for computing critical differential settlement. Each of the models is unique depending on the assumptions made by each group of researchers. Sadek and Shahrour (2007) [32] compared Boussinesq's model with the occasional plastic nature of subgrade and pavement materials. The researchers model was shown to be an improvement on Boussinesq's model. # II. Purpose This work involves the finite element method for predicting pavement deformation. Each model cited is derived either for rigid pavement and flexible pavement. However, this model is also unique owing to assumptions and approach was derived to handle both rigid and flexible pavement. Secondly, according to [33], many models used in the structural design of pavements are complex and/or difficult to use in the field, making its application in pavement analysis rather difficult. This model is devoid of such complexities. # III. Methodology a) Derivation of the New Model i. Model Assumption In the derivation of the new model for deformation behaviour, the following assumptions were made; 1. Loading is symmetrical 2. Soil is elastic, homogenous and isotropic 3. The principle of superposition is valid 4. Constitutive law is valid 5. The idealized system of pavement structure is treated as a beam on elastic subgrade 6. The UDL from asphaltic concrete is converted to point load to produce the worst deformation needed for optimal design. 7. The problem is two-dimensional. ii. Model Derivation A road of base course thickness ?? ?? , asphaltic concrete (AC) thickness as ?? ?? , and width l is subjected to a standard axle load ?? ?? as shown in Figure 10. To determine the total stricture stiffness matrix for a spring assemblage by using the force/displacement matrix relation of FEM, the model is discretized into nodes and element as shown in Figure 3. 13) is obtained. ???? ?? 3 (1+? ?? ) ? 12 6?? ?12 6?? 6?? (4 + ? ?? )?? 2 ?6?? (2 ? ? ?? )?? 2 ?12 ?6?? 12 ?6?? 6?? (2 ? ?)?? 2 ?6?? (4 + ? ?? )?? 2 ? ? ?? 1 ?? ? 1 ?? 2 ?? ? 2 = 0 ? = ? ? ? ?? 1 ?? 0 ???? +?? 2 ???? ?? 2 0 ? ? ? (6) K 2 1 2 3 (1) 0 K 1 ???? + ?? 2 ?? ?? ?(2) (1) ???? + ?? 2 ?? ?? ? 2 2 L 1 l List of Abbreviations ? z = Vertical Stress Q = Vertical Load Z = Vertical Load R = # Highlights ? The need to predict the deformation of highway pavement with a precision that will aid optimal design cannot be overemphasized. Applying the boundary condition ?? 1 ?? = 0 = ? 2 ????????????????? using the 2 nd and 3 rd row of equation 13 whose rows are associated with the two unknowns, ? 1 and ?? 2 ?? and simplifying, we obtain; (7) ?? 2 ?? = (???? + ?? 2 ?? ?? ?)(4 + ? ?? )?? 3 24???? For long slender beams with L about 10 times or more, the beam depth, shear correction term ? ?? is small and can be neglected [34]. For standard highway, L=7. # IV. Conclusion and Recommendation Many roads fail even before their design lives, probably because of using conservative models in their design to save cost. The cost implication of early maintenance and/or rehabilitation implies that using conservative models is not economical in the real sense. This new model, being close with the result from plaxis software shows that it is an improvement on Boussinesq's model which is found to be conservative. Secondly, the dimensional uniformity between unit weight and modulus of subgrade reaction was utilized by the researchers in making it a flexible model that can handle deformation in both rigid and flexible road pavement unlike many existing models. # V. Declarations a) Ethical Approval and Consent to Participate The research observed all ethical codes and done with the consent of all authors involved. # b) Consent for Publication We give our Consent for the publication of the article. # c) Availability of Supporting Data Not applicable d) Code Availability Not applicable e) Funding Not applicable © 2023 Global Journ als ( ) * Highway pavement failure induced by poor soil geotechnical properties along the F209 Okitipupa-Igbokoda highway GJegede 10.4314/ijs.v6i1.32121 Ife Journal of Science 6 1 2004 * The influence of asphalt pavement deformation due to the differential subgrade settlement XJiang YTQiu Hydrogeology and Engineering Geology 4 2004 * Ground temperature and deformation laws of highway embankments in degenerative permafrost regions ZWen WSheng WMa QWu JHFang Chinese Journal of Rock Mechanics and Engineering 2009 * HPeng WMa YMu JinL 2015 Impact of * Expansive subgrade behavior on a state highway in North Texas. Geotechnical and Structure Congress SHossain SAhmed MSKhan AramoonA 10.1061/9780784479742.099 2016 Phoenix Arizona * Aggregate morphology affecting strength and permanent deformation behavior of unbound aggregate materials ETutumular TPan 10.1061/(ASCE)0899-1561 Journal of Materials in Civil Engineering 20 9 9 2008. 200 * GWang YWang RThompson YHAhn 2012 * Long-life pavement design and construction-a case study The 9 th Asia Pasific Transportation Development Conference * Aggregate morphology affecting strength and permanent deformation behavior of unbound aggregate materials ETutumular TPan 10.1061/(ASCE)0899-1561 Journal of Materials in Civil Engineering 20 9 9 2008. 200 * The influence of asphalt pavement deformation due to the differential subgrade settlement XJiang YTQiu Hydrogeology and Engineering Geology 2004 * Laboratory performance of crumb rubber concrete block pavement TLing HNor MHainin AChik 10.1080/10298430802342740 International Journal of Pavement Engineering 10 5 2009 * Effects of coarse aggregate morphology on permanent deformation behavior of hot mix asphalt TPan ETutumuluer SHCarepenter 10.1061/(ASCE)0733-947X(2006)132:7 Journal of Transportation Engineering 132 7 2006 * Investigation on the effects of gradation and aggregate type to moisture damage of warm mix asphalt modified with sasobit KKanitpong NCharoentham SLikitlersuang 10.1080/10298436.2011.565058 International Journal of Pavement Engineering 144 1 2012 * Investigation on the effects of gradation and aggregate type to moisture damage of warm mix asphalt modified with sasobit KKanitpong NCharoentham SLikitlersuang 10.1080/10298436.2011.565058 International Journal of Pavement Engineering 144 1 2012 * Experimental and numerical investigation into behavior of fly ash composite material in the Subbase of surface coal mine haul road BBehera 2013 National Institute of Technology India Ph.D Thesis * Permanent deformation in flexible pavements JUzan 10.1061/(ASCE)0733-947X(2004 Journal of Transportation Engineering 130 1 1 2004 * Permanent deformation evaluation index of asphalt mixture SDu JDai China Journal of Highway and Transport 19 5 2006 * Prediction of flexible pavement degradation: application to rutting in Cameroonian highway GTchemou LSMinsili MototemapaA MEko RManguelle JH Electronic Journal of Geotechnical Engineering 16 2011 * Calculating rutting of some thin flexible pavements from repeated load triaxial test data YQiao ADawson Huvstig LKorkiala-Tunttu 10.1080/10298436.2014.943127 International Journal of Pavement Engineering 16 6 2015 * Simulation of permanent deformation in high-modulus asphalt pavement with sloped and horizontally curved alignment MZheng LHan CWang ZXu HLi QMa 10.3390/app7040331 Applied Sciences 131 1 2017 * Development of pavement permanent deformation model by grey modelling method JCDu DShen 121doi:10. 1080/10286600500126348 Civil Engineering and Environmental System 22 2 109 2005. 2005 * Cause analysis on permanent deformation for asphalt pavement using field core. Construction and Building Material QLi HYang FNi XMa LuoL 2015. 2015 100 * 10.1016/j.conbuildmat.2015.09.012 * An experimental-based model for the mechanical properties of rod pavements using ground-penetrating radar. Construction and Building Material FTosti LBCiampoli D'amico FAlani AMBenedetto A 10.1016/j.conbuildmat.2018.01.179 2018 165 * Dynamic analysis of rigid pavement with vehicle pavement interaction VSawant org/10.1080/10298430802342716 International Journal of Pavement Engineering 10 1 2009 * Back-calculation of transition probabilities for Markovian-based pavement performance prediction model KAbaza 10.1080/10298436.2014.993185 International Journal of Pavement Engineering 17 3 2016 * Finite element analyses of flexible pavement SHelway JDyer JLeidy 0733-947X(1998)124:5(491 Journal of Transportation Engineering 1998 ASCE * Predicting permanent deformation behavior of unbound granular materials MRahman SErlingsson 10.1080/10298436.2014.943209 International Journal of Pavement Engineering 16 7 2015 * Use of the distinct element method to model the deformation behavior of an idealized asphalt ACollop GMcdowell YLee 10.1080/10298430410001709164 International Journal of Pavement Engineering 5 1 2004 * Analysis of asphalt pavement under non-uniform tire pavement contact stress using finite element method MNNahi AIsmail AKAriffin 10.3923/jas.2011.2562.2569 Journal Applied Sciences 11 1 2011 * 3D visco-elasto-plastic finite element analysis of the asphalt pavement rutting deformation ZHe TLei ChenHWang GHou YA Journal of Chogqing Jianzhu University 2008 * Finite element modeling of environmental effects on rigid pavement deformation SKim HCeylan KGopalakrishnan 10.1007/s11709-014-0254-x Frontiers of Structure and Civil Engineering 8 2014 * Nonlinear FEM analysis of influence of asphalt pavement under non-homogenous settlement of roadbed WWeng XZhang ChenB YanS China Journal of Highway 2004 * Use of Boussinesq's solution in geotechnical and road engineering: Influences on plasticity MSadek IShahrour 10.1016/j.crme.2007.08.007 Comptes Rendus Mecanique 335 9 2017 * Permanent deformation and deflection relationship from pavement condition assessment FLeiva-Villacorta AVargas-Nordcbeck JAgular-Moya 10.1016/j.ijprt.2017.03.005 International Journal of Pavement Research and Technology 10 4 2017 * First Course in the finite element method DLLogan Cengage Learning. ISBN 13 68251 2012 * Soil mechanics and foundation engineering SKGarg 2013 Khanna Publishers New Delhi ISBN 9788174091048